6.1 valve springs

[Redtruck-VA]

Daune,
Please provide the link to your 6.1 valve springs. Could not find..

Thanks,

 

[3rdStrikePerformance]

Mopar Performance 6.1L Hemi Exhaust Valve Springs set of 8 Mopar Performance 6.1L Hemi Exhaust Valve Springs set of 8; Mopar 5037477AC Exhaust Springs [Mopar 5037477AC Exhaust Springs] - $39.95 : 3RD STRIKE PERFORMANCE, Your site for Late Model Perfo

 

[Redtruck-VA]

Duane the header say's 8, picture shows 16 and the shipping say's 16. What is what?

 

[Silverbullet08]

"For 5.7L Hemi engines with aftermarket camshafts, order 2 sets of these."

 

[Redtruck-VA]

"For 5.7L Hemi engines with aftermarket camshafts, order 2 sets of these."

Makes sense except for the conflicting information on the page. $40 is cheap and $80 + shipping is too much.

 

[3rdStrikePerformance]

Ok, it is for a set of 16, but they have went up recently. The set of 16 is $64 plus shipping (about $10)

 

[Redtruck-VA]

Duane, is there free shipping on orders over a certain amount?

 

[3rdStrikePerformance]

Duane, is there free shipping on orders over a certain amount?

Depends, what do you have in mind? Somethings have free shipping, some things don't. Obviously, I can't ship a tonneau cover for free or a headers or something. Another words, if it ships by truck freight, I can't ship it for free.

 

[Redtruck-VA]

Depends, what do you have in mind? Somethings have free shipping, some things don't. Obviously, I can't ship a tonneau cover for free or a headers or something. Another words, if it ships by truck freight, I can't ship it for free.

email sent..

 

[03MopaRamman]

Greg, Now all you gotta decide is wether you keep the metal clips on or take em off?
Read up on it and then decide! I happened to ditch em but I know some have kept them on without any issues.

 

[pavester]

metal clips? like the clips on the bottom of the springs? i kept them on if so

 

[Redtruck-VA]

Greg, Now all you gotta decide is wether you keep the metal clips on or take em off?
Read up on it and then decide! I happened to ditch em but I know some have kept them on without any issues.

Danny, I have read some about the buckets having the retaining clips break. And there was a comment the bucket help stabilize the spring. I am leaning toward removing them. Input anyone?

 

[pavester]

is this the "buckets" yall are talking about? if so they stayed on when i did my cam. Sam said very few problems come from them.

 

[Redtruck-VA]

Kyle, yea those are the cups (buckets) the clips on the bottom have been said to break on occasion. Don't know if this is a real problem or not.

 

[KGBIGCOUNTRY]

I also kept mine on. They changed the paint stripe on the 6.1 springs to show a diff spring and cup that have been improved.

 

[3rdStrikePerformance]

We kept ours on our heads we had done also. Haven't heard of any issues with them. Have heard a lot of issues with the factory retaining clips, hence the reason we have the titanium ones....By the way, managed to get them down to $60 a set instead of $64...

 

[OlDirtyJohn]

i see on your site that you offer the 6.1 valve springs. they come in a set of 16. it says on there if you are putting these on a 5.7 you should order 2 sets. i assume this is because the set comes with 8 intake and 8 exhaust springs. and if putting 6.1 springs into a 5.7 you need to use 16 exhaust springs. would you be able to offer a set of 16 exhaust springs only?

 

[KGBIGCOUNTRY]

ODJ are you doing a camswap of any sort??? During a swap you have to go with 16 exhaust 6.1 springs to handle the extra load they recieve.

 

[3rdStrikePerformance]

You need 16 springs if doing a cam swap. Got that worded wrong. Sorry. I will fix that asap

 

[OlDirtyJohn]

yes, looking for 16 6.1 exhaust springs for a future cam install.