Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
I just added front sensors to my 2017 Ram 2500. Bought a used harness with sensors and plugs for fog lights. Bought a used bumper with sensor holes and fog lights. I had a member make me a harness that goes from the park sensor module straight to the sensors. However I did not need the harness as my truck had it from the factory after I did some digging. I would let that harness go if you are interested.
Over the last few weeks I was working on adding rear park assist to my 2018 ram 1500 I used all oem parts except for the harness I made to go from the park assist module to the rear of the truck . I used Alfa obd and Mgrimm bcm id details from the Alfa ond diy and I now have oem rear park assist...
www.ramforum.com
The attached thread is very long but full of great information on adding sensors.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.