AF vs SilverBullet Showdown

[AF_Hemi]

Didn't you have other fitment issues too? Mine had zero clearance problems.

 

[Silverbullet08]

ill be over at my parents around 10. so ill give u an update on how it is...

 

[Trupiano]

O2's for sure! Mine did the same thing when I had front O2 problems on my LT header install, and I dont have a cam. So prolly 99% sure that's the problem.

 

[Silverbullet08]

oh and heres the wrench that almost burned down my whole truck....

 

[shadow11]

oh and heres the wrench that almost burned down my whole truck....

Its a craftsman, what do you expect?

 

[Silverbullet08]

yea they are good conductors of electricity at least ill get another one for free

 

[shadow11]

You need to buy Snap On

 

[ramhunter9]

snap on craftsman all the same .. i love getting free replacements

 

[Silverbullet08]

it was my step dads tool.

 

[Trupiano]

^ Lol Wouldn't it be nice if everyone was rich =P So whats the story with the wrench?

 

[shadow11]

snap on craftsman all the same .. i love getting free replacements

No there is a difference

 

[Silverbullet08]

ok im doing the extentions right now for the sensors. the passenger side fit fine. but i will need to extend the drive side. also where do i put the heat wrap?

 

[Silverbullet08]

''You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application.''

just read that on airram. is that correct?

 

[Off_Road_Teacher]

snap on craftsman all the same .. i love getting free replacements

Same here. I am always taking ratchets back to the sears store for new ones.

 

[shadow11]

Same here. I am always taking ratchets back to the sears store for new ones.

But if you bought Snap On you wouldn't have to keep going back and get new ones

 

[KGBIGCOUNTRY]

But if you bought Snap On you wouldn't have to keep going back and get new ones

True becasue the snap on guy will come to your shop atleast once a week to collect payment and sell ya more tools.

 

[Trupiano]

You can splice them too, I did and they worked fine. But the plug and play ones are much better. Clean install! Did you keep your cats? Or gut them?

 

[Off_Road_Teacher]

''You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application.''

just read that on airram. is that correct?

Nope. I've got two that are spliced and two on extensions. All four work fine.

 

[Off_Road_Teacher]

But if you bought Snap On you wouldn't have to keep going back and get new ones

I will say tht the craftsman 1/2 ratchets do not last very long.

 

[Silverbullet08]

ok cool thanks for the info. now do i put the heat wrap over the wiring?