FlatbedHemi
Senior Member
For those of you who run anything hydraulic on your rig, I need some input. I have a 12v hydraulic pump going on my new flatbed setup to run the hydraulic hay spear built into the bed. I have everything set up to plumb in on the bed, but I cant figure out where t run the hydraulic remote so that it can be operated from within the cab. IF you are running a hydraulic remote, or anything into the cab, where did you run the cable through? My remote cable has about a 1" connector on the end, and I really dont just want to cut a big hole in my floor if there is a better option.
Here is my style of remote for reference.
Here is my style of remote for reference.