Alpine/Kenwood Stereo Install

[G_Altima]

I just ran everything down the sides of the vehicle. There was enough room under the sill plates and carpet to run all the wires and not have it all lumpy looking.

 

[audio1der]

Nice job- I bet that sounds clean as hell.
Where do you buy seat spacers?

 

[White Beauty]

[/URL]

What was the depth behind the handle to mount the camera? is it a huge void area?

 

[G_Altima]

Nice job- I bet that sounds clean as hell.
Where do you buy seat spacers?

The seat spacers came with the box but they were for a quad cab not the crew cab. The crew cab ones are slightly longer. They are 1.5" thick so i made some out of 2 pieces of 3/4" MDF and glued them together to get the 1.5".

 

[G_Altima]

What was the depth behind the handle to mount the camera? is it a huge void area?

There is nothing behind the handle. The void is the thickness of the tailgate. Plenty of room to mount the camera.

 

[mxblaster83]

There is nothing behind the handle. The void is the thickness of the tailgate. Plenty of room to mount the camera.

what size hole did you drill for that camera, and how did you run the wires to the deck?

i just bought the same camera today!

 

[G_Altima]

Here is the link for my backup camera install.

I ran the video cable down the passenger side of the vehicle. The only problem i had was that i ran the wires through the hole underneath the tailgate that's used to lower the spare tire.

 

[coachtjm]

what length rca cables did you need

 

[G_Altima]

what length rca cables did you need

I believe the one i used was 25' and had plenty of extra, but can't quite remember for sure.

 

[nick_si]

I like how you installed the tweets in the doors, I will be doing mine like that today! I will be using the factory HU if it is not enough I will amp the front.

 

[Informal]

Just curious, why two sets of tweeters?
Or am I seeing it wrong?

Edit: nevermind... The tweets in the door are in the rear... I thought you had in front door, as well as mirror mount.

 

[PX8]

Do you remember the tweeter depth mount length? Also did you buy the brackets for the mids?

 

[G_Altima]

I do not remember the tweeter dimensions off hand. The brackets and all necessary hardware was included with the speakers.