Alright guys.. BILSTEINS post your pics!!!

[R.L.K.]

I haven't posted a pic of my truck here in a long time , but I took one in my driveway today .
My truck : 2014 Ram 4x4 QC Bils. @+2.8" and 1.5" TGC rear coil spacers . Stock OEM wheels and tires



Sent from my SM-G930V using Tapatalk

 

[jaycabral27]

Forgot to post a picture after it has settled. Looks dead level to me


Sent from my iPhone using Tapatalk

 

[inthe510]

I had Bilstein 5100's installed all the way around a few months back. I wanted a slight rake and set the fronts at 2.1 giving me about a 1" difference. Just got AEV Mesa 18x8.5 wheels and General Grabber APT LT275/70R18 tires installed. The wheel color is called onyx, but looks almost the same as the granite crystal metallic paint.

 

[KDog456]

Bilstein's @ 2.8" with a Zone 1.5" Body Lift, Stock Sport Style Rims on 1.5" BORA Spacers, 35x12.50R20 Mickey Thompson Baja ATZ P3's

 

[co-pilot]

Bilstein's @ 2.8" with a Zone 1.5" Body Lift, Stock Sport Style Rims on 1.5" BORA Spacers, 35x12.50R20 Mickey Thompson Baja ATZ P3's

Looks good!!!...........really like those factory wheels

 

[KDog456]

Looks good!!!...........really like those factory wheels

Thanks man, I love them living in Wisconsin. The polished aluminum doesn’t rust like most other wheels.

 

[Matts175]

Just got done a few minutes ago. Took me almost 2 days, LOL.

2.8" 5100s in the front. Mevotech UCAs. 1" TGC spacers and 5100s in the rear.

I want to thank everyone here at these forums. It was hard work, but your posts were very helpful. Couldn't have gotten it done without you guys. THANK YOU!!!

 

[Addicted2fishing]

Just got done a few minutes ago. Took me almost 2 days, LOL.

2.8" 5100s in the front. Mevotech UCAs. 1" TGC spacers and 5100s in the rear.

I want to thank everyone here at these forums. It was hard work, but your posts were very helpful. Couldn't have gotten it done without you guys. THANK YOU!!!

View attachment 166431

Looks awesome !!!! Pics of the UCA? [emoji18]


Sent from my iPhone using Tapatalk

 

[FlaSeadude]

Bilsteins set at 2.8 with RBP 20"X 10" Atomic Wheels and Yokohama 295/60-20 Tires:

 

[Matts175]

Looks awesome !!!! Pics of the UCA? [emoji18]


Sent from my iPhone using Tapatalk

 

[roadrnnr]

View attachment 166498

What's your CV angles look like?

 

[Addicted2fishing]

View attachment 166498

How are they all settled in ? I have a hard time justifying $600 for Zone UCA’s when my truck is a pavement pounder. I do not off-road in my truck and never will. Worst it sees is dirt roads for fishing and hunting occasionally these days.

Ball joints looking ok ?


Sent from my iPhone using Tapatalk

 

[Matts175]

Everything looks fine to me. This picture is the truck just sitting in the driveway. It's getting an alignment tomorrow at 10am. I have only driven it a few miles, but it rides sooooo much better now. I don't want to drive it too much until the alignment is done. I never go "off-roading" either. I have a Can Am 4x4 for that.

 

[Addicted2fishing]

Everything looks fine to me. This picture is the truck just sitting in the driveway. It's getting an alignment tomorrow at 10am. I have only driven it a few miles, but it rides sooooo much better now. I don't want to drive it too much until the alignment is done. I never go "off-roading" either. I have a Can Am 4x4 for that.

View attachment 166640

It’s hard to see the ball joint but looks decent to me. The CV angles also seem quite reasonable [emoji106][emoji106]. Might get a little bonus in the late summer and I’m REALLY itching for my bils and rear spacer [emoji48]

Thanks for the pics BTW [emoji18]


Sent from my iPhone using Tapatalk

 

[roadrnnr]

Everything looks fine to me. This picture is the truck just sitting in the driveway. It's getting an alignment tomorrow at 10am. I have only driven it a few miles, but it rides sooooo much better now. I don't want to drive it too much until the alignment is done. I never go "off-roading" either. I have a Can Am 4x4 for that.

View attachment 166640

Can't look any better than that. My 2011 with the old style diff has bad angles at 2.8. Amazing the differance, hence the reason I am having a diff drop put on. Wish I didn't have to.

 

[Petebeard]

I have a 2011. I didn't realize there was that much difference in CV angles.? Are all the early 4th gens like that? Or are some guys just luckier than others, like with stock ride height?

 

[roadrnnr]

I would say if you have a 2012 or older you will have extreme angles compared to 2013 up. I will say before I redid mine I had a 2" Hell Bent Spacer on mine for 30000 miles with absolutely no problems, vibrations or wobble. So 2" is safe without any mods I think.

But I know now with bills set at 2.8 my angles are about the same as when I had 4"

 

[jdiesel73]

Finally got around to having my Bilsteins installed after having them sitting in my garage since Christmas.

Bilstein 5100s on all 4 corners, fronts set to 2.8
PA 1.5 rear coil spacer
Currently sitting on stock rims and tires
BFG KO2 275/65R20 tires to come

Bottom pic is before, top is after Bils and PA spacer were installed.

 

[Addicted2fishing]

Finally got around to having my Bilsteins installed after having them sitting in my garage since Christmas.

Bilstein 5100s on all 4 corners, fronts set to 2.8
PA 1.5 rear coil spacer
Currently sitting on stock rims and tires
BFG KO2 275/65R20 tires to come

Bottom pic is before, top is after Bils and PA spacer were installed.

View attachment 166841

That’s what they SHOULD look like from factory in my opinion. Awesome set up


Sent from my iPhone using Tapatalk

 

[Hemi395]

^^I agree, the 4wd trucks should sit like that from the factory