Bilstein 5100 and 2013 Ram 1500 Big Horn

[USMC92SSGT]

I'm looking to install Bilstein 5100s on the front to level the rake on my 2013 Ram 1500 Big Horn. Two questions:
1) Are the Bilstein 5100s compatible with the 2013s (most online parts distributors don't offer this option, with the exception of autoanything.com)?
2) Where should I get them installed (I don't have a vehicle lift, coil compressor, etc.)?
Thanks!

 

[huff2462]

Yeah, they'll work.

I'd just go to any trustworthy mechanic (you'll pay top dollar at a dealer)... don't forget to get the alignment done after!

-
'13 RAM 1500 Big Horn, 5.7L Hemi, 8-sp trans, 4x4, 3.21 gears

 

[Adept]

I'm looking to install Bilstein 5100s on the front to level the rake on my 2013 Ram 1500 Big Horn. Two questions:
1) Are the Bilstein 5100s compatible with the 2013s (most online parts distributors don't offer this option, with the exception of autoanything.com)?
2) Where should I get them installed (I don't have a vehicle lift, coil compressor, etc.)?
Thanks!

Ssgt,

If it helps any I put the bilstein 5100s on the front of my truck at 2.1" to level my 6" lift. I believe they will work on a 2013, not sure, but I don't see why not. They are a really great piece of equipment. Probably a lot better then putting a spacer on too. You should check out Bully's Performance they can get you a good deal on this part. First off if you live in jacksonville, nc then do not go to jax 4x4 they charge too much to put on a level kit, also tire country isn't reliable. Other than that you could always go to the hobby shop and do it yourself, They have everything you could possibly need (if you're still in) if not just read some reviews on places nearby. It should only cost about 100 dollars to get it installed. Also, I highly recommend an alignment, otherwise your gonna have a bad day all around

-Corporal of Marines.