Bilstiens and 35" nittos

[AustinB]

Finally done. Thanks to all that gave me advise. Bilstien at 2.8, 3/4 rear spacer, 17x9 fuel revolver 0mm offset, 35x12.50x17 Nitto Trail Grapplers on a dirty truck. Zero rubbing.

 

[AustinB]

And from the other side.

 

[AustinB]

Just a wheel comparison...

 

[Reo Cook]

Looks great! I dig the 17s over the 20s. Makes a huge difference with a meaty tire. Enjoy!

 

[R.L.K.]

Awesome!

The 17" wheels are Great and the way to go imo !

 

[Thor09]

Looks good!

 

[AustinB]

Thanks, yep I'm so glad I didn't stay with the 20" rims.

 

[gassersarentdead]

Aftermarket 20s look good on a 35 or bigger, of course they don't on tiny tires.

 

[edemce]

Looks great !

 

[PassivAggressor]

The perfect setup!

 

[AustinB]

I will be doing the 4" superlift within the next few months. This was just prepping for it. I'm kinda on a coin flip for wether they looked "stuffed" or not. But I'm definitely happy about how it turned out!

 

[AustinB]

Just a small update for any viewers... I do rub the fender well in reverse, at full lock. Its the loose hanging plastic at the back of the wheel... Could very easily be fixed via heat gun but I will wait and see if the lift (4 or 6) will help it any. Nothing major, turn full lock then give it 1" of slack, no rubbing.

 

[Drummin4jc]

Just a small update for any viewers... I do rub the fender well in reverse, at full lock. Its the loose hanging plastic at the back of the wheel... Could very easily be fixed via heat gun but I will wait and see if the lift (4 or 6) will help it any. Nothing major, turn full lock then give it 1" of slack, no rubbing.

Either lift would take away that rubbing for sure.

Adam

 

[R.L.K.]

It may be a bit stuffed now , but the four or six inch superlift will fix that !