Black 2019 with mopar lift and 35’s

[Ravjay12]

Looks to me like a Fox 2.0 coilover level kit. The 35’s and lack of step bars make it seem taller than it is.

 

[DRkNESS]

Fox coilover are what I believe come with our Mopar 2” lifts. I know I have Fox shocks front and rear on mine.

 

[ksn240]

Looks to me like a Fox 2.0 coilover level kit. The 35’s and lack of step bars make it seem taller than it is.

It also looks leveled. They did more than 2" up front. The Mopar kit does not level it out. Also my 2019 is leveled in the front and my angles are no where near that bad.

 

[ksn240]

Here is a pic of my angles up front with Readylift spacers and upper control arms for comparison.

 

[Ravjay12]

It also looks leveled. They did more than 2" up front. The Mopar kit does not level it out. Also my 2019 is leveled in the front and my angles are no where near that bad.

Perhaps the Fox kit has a little more rise in the new RAMs or maybe it hasn’t settled yet.

 

[DRkNESS]

All I know is that I have the Mopar 2” lift installed by the dealer, and my stuff is nowhere near that front height.

 

[DRkNESS]

 

[JB1]

The 35” tires gave lift as well, yours are much smaller

 

[DRkNESS]

^^^^, Hey LoL, lets not get personal.

 

[JB1]

Lol

I have tried to get the info guys, some salesman keeps stalling my emails and acts like he wants my phone number first ( that ain’t happening ), maybe one of you guys can reach out to them, otherwise it’ll be one of those life’s mysteries hah

 

[DRkNESS]

I also tried and just like you they wanted my information so they could “ call “ and tell me all about what’s done. No thank you, don’t post about a modified truck, if you don’t want to list what’s done.

 

[Basslicks]

check out this bad boy

https://www.arlingtonheightscdjr.co...Ram-1500-cf3a1b350a0e0ae803cbc8656d1aba3a.htm

View attachment 132299

View attachment 132300

View attachment 132301

View attachment 132302

View attachment 132303

Looks great, but needs to ditch the lower air dam... kinda ruining the look and making the front look lower to the ground than it really is.

 

[DRkNESS]

Why is it that on certain posts, it seems to duplicate what has already been written ?

 

[mathews8pt]

Sharp trucks!


Sent from my iPhone using Tapatalk

 

[S0CAL]

The 35” tires gave lift as well, yours are much smaller

What no guy ever wants to hear...

 

[JB1]

What no guy ever wants to hear...

*****

 

[xACRx]

I looked further in to these lifts and the dealership is using an outside company called Fox River Customs to install the lifts. This would explain the sticker placed on the rear of the bed labeled FRC Offroad. These are in fact 2” suspension lifts running 35x12.50 tires. See attached picture.

 

[JB1]

Thanks, for the info, now we finally know the specs. Sure looks good

 

[DRkNESS]

I like the fact that with with solely a 2”lift, with the right tires we can do a 35” one...

 

[ksn240]

I still think thats more than a 2" left in the front. It has to be a 2" lift all the way around plus a level in the front. I have 34s and a 2" level and I don't have as much room in between the tire and fender.

Also, the angle for that cv joint looks a lot worse than mine. With a 2" level, mine are nearly straight.

The way those trucks sit looks the same height as the Readylift 3.5" kit.