Camshaft fails

[Wild one]

Guy brought this truck to a shop for an oil leak after doing a cam replacement.Be careful when installing a new cam,as this guy apparently was a bit rough when he installed the cam,and pushed the rear plug out of the cam tunnel

 

[crash68]

Be careful when installing a new cam,as this guy apparently was a bit rough when he installed the cam,and pushed the rear plug out of the cam tunnel

..so how many hours did it t̶a̶k̶e̶ ̶y̶o̶u̶ "that guy" to fix his mistake?
LOL!

 

[Wild one]

..so how many hours did it t̶a̶k̶e̶ ̶y̶o̶u̶ "that guy" to fix his mistake?
LOL!

I found this on facebook,so i had nothing to do with it,but i'm guessing the shop probably charged him a fair bit,as the transmission would of had to come out to repair the leak,lol

 

[HEMIMANN]

 

[Ken226]

Kitty says dumbass

Kitty from that 70's show calls Eric a *******!

youtu.be

 

[Dodge 1500 4X4]

He must have used a hard blow Sledge on the cam, the dowel pin is sheared what an Einstein.

 

[Wild one]

He must have used a hard blow Sledge on the cam, the dowel pin is sheared what an Einstein.

That should be the back side of the cam,i don't think you could physically get it to go in the wrong way

 

[Dodge 1500 4X4]

That should be the back side of the cam

Yae bellhousing end, the eyes oh the eyes.

 

[Wild one]

Yae bellhousing end, the eyes oh the eyes.

It'd take a mighty big sledge hammer to get it to go in the wrong way

 

[04fxdwgi]

How is it even possible that someone that has ability to pull an engine down enough to change a cam and reassemble and getting it running again will do that?

take his tools away.

 

[Wild one]

How is it even possible that someone that has ability to pull an engine down enough to change a cam and reassemble and getting it running again will do that?

take his tools away.

Real big guy who's frustrated and mad