Phillyrube
Senior Member
Is there any way to deactivate the cargo lights from coming on except via the switch?
Cargo Light Question
- Thread starter Phillyrube
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jan 5, 2011
- Posts
- 13,076
- Reaction score
- 28,468
- Ram Year
- 2016
- Engine
- hemi 5.7
I guess you could pull the fuse. Why do you want it deactivated ?
OP
OP
Phillyrube
Senior Member
Just dont want them to come on when locking or unlocking via the key fob.
Ramagain
Senior Member
Do you also have the horn disabled?
Only way I could think of would be to add a switch. The harness for the CHMSL is on the driver side A pillar. It has a green connector. I would splice it at the headliner half of the connector and run the wires into to the dash panel.
Only way I could think of would be to add a switch. The harness for the CHMSL is on the driver side A pillar. It has a green connector. I would splice it at the headliner half of the connector and run the wires into to the dash panel.
Oliver Closehauf
Senior Member
- Joined
- Nov 21, 2020
- Posts
- 745
- Reaction score
- 499
- Location
- Cincinnati
- Ram Year
- 2005 Laramie
- Engine
- Cummins 5.9
I'm going to take a guess that it's in case the wiring in the A-pillar is running something else, he doesn't want to chance affecting it.
Planning on upgrading the cargo light bulbs to high output LED bulbs so this is right up my alley. Installing a kill switch will allow me to only use them when necessary. Planning on tracing the + wire at the source and matching it up at the A-pillar/ Driver dash area.
