Core 4x4 endlinks

[Dustin Steffey]

I know there are tons of people on the forum that have used core 4x4. I just received my endlinks today and I need to figure out hardware for installing. Does anyone know what size bolts they have used to install theirs? I’d use the factory ones but they are way too short.


Sent from my iPhone using Tapatalk

 

[ram1500rsm]

Dustin, take a quick trip to Lowes or Home depot tomorrow morning. You should be able to find longer replacements bolts and nuts.

 

[crazykid1994]

You didn’t order the hardware with the links? I can’t be 100% On size so I would suggest just take one end link with you to the hardware store and find the largest bolt that’ll fit in the hole and it only has to hang out enough to go maybe 1”. And get 2 large washers to use on either side of the core bushings. Multiply that by 4 and good to go.

 

[Dustin Steffey]

Dustin, take a quick trip to Lowes or Home depot tomorrow morning. You should be able to find longer replacements bolts and nuts.

Went to Lowe’s and they don’t have a large enough bolt for figure.


Sent from my iPhone using Tapatalk

 

[ram1500rsm]

Went to Lowe’s and they don’t have a large enough bolt for figure.


Sent from my iPhone using Tapatalk

Grade 8 or 5? Damn
They should be on the custom shelves where they have the hard to find clips/washers/bolts etc.

 

[Lyle Longboat]

3.5 “ long and a 3/4 bolt.

 

[CincyZach]

Did you buy them direct from Core 4x4. I’m almost positive they sent me all the needed hardware. I’d call them... I’m sure they can either send it to you or give you the specs for what you need.

 

[Dustin Steffey]

Did you buy them direct from Core 4x4. I’m almost positive they sent me all the needed hardware. I’d call them... I’m sure they can either send it to you or give you the specs for what you need.

Yeah Nick is working on that.


Sent from my iPhone using Tapatalk

 

[Dustin Steffey]

View attachment 211707 3.5 “ long and a 3/4 bolt.

Thank you I’m going to try and figure this out tomorrow!


Sent from my iPhone using Tapatalk

 

[22hemi13]

I get all my grade 8 bolts from ace hardware.