I had some extra money this month so I bought a set of Core4x4 T3 rear arms for my 2wd 1500. The place I bought them from did not have the "0-6 inch" and "6+ inch lift" options on their page. I have a few questions that I hope you guys can answer:
1. What is the difference between the 0-6" and 6+" lift options? Overall length? How can I tell which ones were shipped to me?
2. I plan on lowering the truck using a BT 2/4 kit. Do I still need the no cut brackets with the control arms? Do I have to modify the control arms to use the brackets?
3. When I bought the control arms, I also bought the hardware kit. The bolts are a bit smaller in diameter that the steel bushings in the arms. Is this normal? I thought the OD of the bolt should be nearly the same size as the ID of the bushing? Will this cause slop and lead to noise? Can I buy bushing inserts to take up the difference?
I guess I could email Core4x4 but I figured I'd hit you guys up first since there are quite a few members running these control arms.
1. What is the difference between the 0-6" and 6+" lift options? Overall length? How can I tell which ones were shipped to me?
2. I plan on lowering the truck using a BT 2/4 kit. Do I still need the no cut brackets with the control arms? Do I have to modify the control arms to use the brackets?
3. When I bought the control arms, I also bought the hardware kit. The bolts are a bit smaller in diameter that the steel bushings in the arms. Is this normal? I thought the OD of the bolt should be nearly the same size as the ID of the bushing? Will this cause slop and lead to noise? Can I buy bushing inserts to take up the difference?
I guess I could email Core4x4 but I figured I'd hit you guys up first since there are quite a few members running these control arms.