BradKnob
Senior Member
- Joined
- Mar 12, 2014
- Posts
- 1,382
- Reaction score
- 395
- Location
- Prairieville, LA
- Ram Year
- 2012
- Engine
- 5.7 hemi
Well here it is, the internets first review of a Crown Suspension product...
OK Not sure if thats true but after a decent amount of searching all i found was threads of people asking about the their stuff but no real answers. Well I offered my truck and safety to science and took the plunge on a not so well known product...
I would also like to mention that I am in no way affiliated with Crown suspension nor was I compensated in any way for this review.
My truck is a 2012, and I bought it a few weeks ago with a 2" or 3" drop in the rear (Im not sure maybe you all could help). It seemed to me the front alwways looked higher than the rear and it drove me crazy. And this is where my quest to fix it has led me.
Heres their website
Crown Suspension Lowering Kit Lift kit
The link to where i bought the springs
Crown Suspension 09 14 Dodge RAM 1500 V8 1" Lower Drop Front Coils Spring Kit | eBay
Springs showed up in about 5 days. Shipping weight was 33Lbs. Im no expert but they seem well made and are pretty beefy. Thicker than stock as you can see below.
Everyone loves stickers, right?
Stock on left, Crowns on right. Look to be a little les than an entire coil shorter.
Tried to capture the thicknes difference of the two.
Gap was right at 5" before and when it was all over it was about 3.75" so got about 1.25" inches total
Truck as i bought it...
Truck after...
Here she is shined up, harder to see where fender wells end..
I got it put together just in time for a 200 mile trip. No problems with installation, fit right in. Rides exactly like stock, no creeks, rattls or clunks so far. Stance is exactly what I was looking for. So far i would have to say Crown suspension is a legit company that makes a good product. Would I buy from them again...Yes. Would I recomend them...Yes, as of right now since I only put about 220 miles on them since i installed them.
Thanks for reading, hopefully I can make up some minds if anyone was on the fence about purchasing from this company. I will gladly answer any question if there are any.
OK Not sure if thats true but after a decent amount of searching all i found was threads of people asking about the their stuff but no real answers. Well I offered my truck and safety to science and took the plunge on a not so well known product...
I would also like to mention that I am in no way affiliated with Crown suspension nor was I compensated in any way for this review.
My truck is a 2012, and I bought it a few weeks ago with a 2" or 3" drop in the rear (Im not sure maybe you all could help). It seemed to me the front alwways looked higher than the rear and it drove me crazy. And this is where my quest to fix it has led me.
Heres their website
Crown Suspension Lowering Kit Lift kit
The link to where i bought the springs
Crown Suspension 09 14 Dodge RAM 1500 V8 1" Lower Drop Front Coils Spring Kit | eBay
Springs showed up in about 5 days. Shipping weight was 33Lbs. Im no expert but they seem well made and are pretty beefy. Thicker than stock as you can see below.
Everyone loves stickers, right?
Stock on left, Crowns on right. Look to be a little les than an entire coil shorter.
Tried to capture the thicknes difference of the two.
Gap was right at 5" before and when it was all over it was about 3.75" so got about 1.25" inches total
Truck as i bought it...
Truck after...
Here she is shined up, harder to see where fender wells end..
I got it put together just in time for a 200 mile trip. No problems with installation, fit right in. Rides exactly like stock, no creeks, rattls or clunks so far. Stance is exactly what I was looking for. So far i would have to say Crown suspension is a legit company that makes a good product. Would I buy from them again...Yes. Would I recomend them...Yes, as of right now since I only put about 220 miles on them since i installed them.
Thanks for reading, hopefully I can make up some minds if anyone was on the fence about purchasing from this company. I will gladly answer any question if there are any.