olyelr
Senior Member
WOWZA!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Looks like that would fit perfectly in one of the in-floor storage bins, no?
"the factory bed step is actually well built and fits underneath the bumper perfectly."
I'll 2nd that comment. I've got one on my truck and because of my advancing age, it's a body-saver!
I've been debating this exhaust since I purchased mine because I had a Borla system on my last truck. Tracking down where anyone had posted what it sounds like installed was a bit of a challenge as there simply aren't many out there. Just purchased on your recommendation.The Borla exhaust sounds soooooo good. I recommend it to anyone, there is ZERO drone.
I've been debating this exhaust since I purchased mine because I had a Borla system on my last truck. Tracking down where anyone had posted what it sounds like installed was a bit of a challenge as there simply aren't many out there. Just purchased on your recommendation.
Received a text from FedEx today stating they picked up a package for me to be delivered Wednesday. Thanks to your video, I now feel like taking the rest of the week off (mine ends on Thursday anyway) and camping out on my front porch! Thank you! that sounds incredible! And might I add, you have good taste in trucksTook a cold start video for you: https://youtu.be/mrceqb6dHuc
That sounds exactly like my magnaflow muffler on the cold start until you rev'd it a bit...Sounds great! Any drone? I left my resonator in, as I do a lot of very long trips towing a 4 position enclosed sled trailer at 85+ and peeps would be a ********...enjoy!Took a cold start video for you: https://youtu.be/mrceqb6dHuc
That sounds exactly like my magnaflow muffler on the cold start until you rev'd it a bit...Sounds great! Any drone? I left my resonator in, as I do a lot of very long trips towing a 4 position enclosed sled trailer at 85+ and peeps would be a ********...enjoy!
Since I can't edit the main post anymore I'll have to keep a new one posted every so often.Hey everyone, this will be the build thread for my 21 Power Wagon. The plan for this build is to make it a fun commuter with some improved overlanding / offroad capabilities. I will post pictures of all parts and I’ll do my best to write reviews on everything and do some install tips and tricks for anyone looking to do any of these mods themselves. I welcome all advice and tips from anyone who has a power wagon…if you know of a better part or recommend something else please let me know! Below are the parts currently ordered and the ones that are upcoming in the near future. I look forward to talking and getting to know everyone throughout this build!
Parts ordered:
- Factory 55 Ultrahook Winch hook (installed)
- S&B Intake (installed)
- Moes Performance Ported Throttle Body 87mm (installed)
- Borla S-type exhaust Part #140801BC (back-ordered)
- Ram All WX floor mats (installed)
- Bulletpoint Mounting solutions: Dual 20mm Ball Dash Phone Mount (installed)
- Blue Ridge Overland Tool Bag (installed)
- My Medic MYFAK med kit (delayed)
- Nextbase 622GW 4k Dash Cam (waiting for hardwire kit to be delivered)
- Full Ceramic 9yr Titanium exterior coating to include interior and windows (installed)
- Full Ceramic window tint scheduled for the week after (waiting for an appointment)
- Full Thuren suspension (ordered)
- Thuren FOX 2.0 ATS damper (ordered)
- AMP research steps (back-ordered)
Parts ordering in the next 30-60 days:
- 35" Cooper STT Pros (ordering soon)
- ARB tire repair kit
- Winch recovery kit (haven’t decided on a brand yet)
- GJ motorsports third brake light w/ baja design pods
- CJC motorsports fog light bracket w/ baja design cubes
- Putco Blade LED Bed light
- Diamondback HD bed cover / RSI Smart cap (still researching brands).
- Ram Factory bed step
- Rear seat cover for 2x car seats (still researching brands)
- ARB Air compressor kit w/tank
- Alpha OBD
- Tuning (Possibly hemifever, HP tuning...still undecided)
- I’m open to any parts suggestions too, would love some input!
That’s it for now, I’ll keep this list constantly updated on parts ordered and future / upcoming parts.
Took a cold start video for you: https://youtu.be/mrceqb6dHuc
"Low key bag junky"... I resemble this remark! Nice bag, looks similar to the smittybuilt bag I have.For those of you who did not get the bed utility group option here is the part number for the bed step if your looking to upgrade: 82215842AH. I ran the Amp bed step on my 2016 Ram 2500 and I loved it as well, both of the step options are quality. Normally, I would suggest aftermarket 95% of the time, but the factory bed step is actually well built and fits underneath the bumper perfectly. The amp step will be wider however, you will not get the additional kick out plate that the factory one comes with. It definitely comes in handy when deploying it.
View attachment 470561
Really easy install, I give it a 1 out of 5 star difficulty rating. Held in by four bolts, took maybe 20 mins tops.
View attachment 470562
Next up is a medical kit from My Medic. I searched around for awhile and I couldn't find a med bag that I liked, most looked cheap and too tacticool for my taste. I was originally going to buy a bag and stuff it with all the goodies I needed but my searching led me to My Medic's Myfak kit. The kit already comes pre-packed with 95% of the items I was going to put in a med kit anyways so it was a win win. It is a tad pricey, but with all the discounts floating the web it isn't too bad at all. I'm a low key bag junkie and I respect high quality bags, pictures do not give it justice but the bag is made very well. Almost as good as my factory 55 bags but cheaper.
View attachment 470563
Still undecided where I want to mount it though...need to find a spot where my 2 year old's won't go to town on it.
View attachment 470564
It's the 14-18 Borla S-Type exhaust Part #140801BC (see post #38 in this thread). It's a perfect fit on a 2021!which borla kit do you have. I hate the one i bought. Too much drone. Can you confirm it will fit the 2021 power wagon?
which borla kit do you have. I hate the one i bought. Too much drone. Can you confirm it will fit the 2021 power wagon?
Thank you Dredger, beat me to itIt's the 14-18 Borla S-Type exhaust Part #140801BC (see post #38 in this thread). It's a perfect fit on a 2021!
Can't go wrong with anything from Smittybuilt either! A bed step is a must...probably my favorite accessory to date."Low key bag junky"... I resemble this remark! Nice bag, looks similar to the smittybuilt bag I have.
Thanks for the info on the step, definitely need to add to my PW because I can barely get into the bed!