Dark Knight 500
Senior Member
I have searched high and low for an answer to my problem.
I noticed today that my 4wd switch, lower instrument panel switches, rain sense wipers and auto high beams were all dead. I used alphaobd to read codes and found U1009 & U0213 in the BCM.
I had recently installed tow mirrors and used alphaobd to enable them. The only other thing I had done is enable LED exterior lights.
I have checked all obvious fuses, and ran through factory diagnostics (Un plugging things on the LIN2 BUS one at a time to see if the code goes away)
The things I tried were rain sensor, humidity sensor, rear view mirror and compass module.
Any help would be greatly appreciated.
Thanks
I noticed today that my 4wd switch, lower instrument panel switches, rain sense wipers and auto high beams were all dead. I used alphaobd to read codes and found U1009 & U0213 in the BCM.
I had recently installed tow mirrors and used alphaobd to enable them. The only other thing I had done is enable LED exterior lights.
I have checked all obvious fuses, and ran through factory diagnostics (Un plugging things on the LIN2 BUS one at a time to see if the code goes away)
The things I tried were rain sensor, humidity sensor, rear view mirror and compass module.
Any help would be greatly appreciated.
Thanks
Last edited: