DFW Performance shops

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

WWlorodd1

Member
Joined
Nov 26, 2017
Posts
31
Reaction score
19
Location
Fort Worth, TX
Ram Year
2011 Ram Sport
Engine
Hemi 5.7
Looking for a reliable shop in the DFW area to install long tube headers and upgrade my cam. Any suggestions? Not looking to turn this into a race truck but want to be able to hang with these Scat packs around here. LOL
 

Wild one

Senior Member
Joined
Jan 17, 2016
Posts
14,141
Reaction score
24,625
Ram Year
14 Sport
Engine
5.7
Looking for a reliable shop in the DFW area to install long tube headers and upgrade my cam. Any suggestions? Not looking to turn this into a race truck but want to be able to hang with these Scat packs around here. LOL
Check with Matt Fikac at Moes. To keep up with a car that weighes roughly 1,000+ lbs less and has close to 100 more horsepower is gonna take more then a cam and long tubes,especially on a 2011 truck with the 5 speed RFE transmission. A cam and long tubes with a good tune,might get you into the high 13's,and that's a big "might" ,most Scatpacks will run easy mid to high 12's. Honestly if you want to build a truck to run with a Scatpack,trade off the one you have on a newer truck with the 8 speed,preferrably a light weight regular cab shortbox tradesman or express,then you might have a fighting chance of keeping up with a 485 horse 8 speed Scatpack
 
Top