Dip stick tube removal

[Ramitiner]

I need help ASAP. I'm Trying to remove the f@cking dipstick tube to install my headers and the bottom bracket screw is backed up as much as if can go and it's touching the F@cking plate so it won't back out any further.

 

[Wild one]

I need help ASAP. I'm Trying to remove the f@cking dipstick tube to install my headers and the bottom bracket screw is backed up as much as if can go and it's touching the F@cking plate so it won't back out any further. Please call or offer advice if you've done this before on a 4x4
646-523-4575
973-936-2956

Think I warned you about that bolt,lol. Some guys cut the bracket off,but on the last set of headers I did,i used a thin cut-off disc in a small angled die grinder and cut the bolt off after backing it out as far as I could,then cleaned the threads up on the bolt and re-used it afterwards to re-bolt the bracket back on again.

 

[Hemi395]

Is this the one that won’t come out unless you drop the front diff?

 

[Ramitiner]

Whoever designed this **** should be shot.. I didn't drop the diff... I unbolted the engine mount, jacked up the engine about 2 inches and that gave me room to remove the ******* thing. Most ridiculous thing I've ever ******* seen

 

[Tim Garceau]

Sounds like you were pretty close to installing a cam too!

 

[Ramitiner]

Sounds like you were pretty close to installing a cam too!

Don't tempt me... My goal is lth, cam and then SC.. doing one per year... SC might take 2 yrs cause Whipple is expensive

 

[Manump95]

I need help ASAP. I'm Trying to remove the f@cking dipstick tube to install my headers and the bottom bracket screw is backed up as much as if can go and it's touching the F@cking plate so it won't back out any further.

Hey I’m reinstalling mine and I wasn’t able to find a o ring with it, do I need an o ring for it or doesn’t?

 

[Wild one]

Hey I’m reinstalling mine and I wasn’t able to find a o ring with it, do I need an o ring for it or doesn’t?

Unless you like leaks you should probably install one.

The official Mopar part number for the 2017 Ram 1500 5.7L Hemi engine oil dipstick tube O-ring is 53021144AA (also listed as the engine oil indicator tube seal)

https://parts.moparonlineparts.com/oem-parts/mopar-engine-oil-indicator-tube-o-ring-53021144aa?origin=pla&srsltid=AfmBOoqeQ6EUCWokO6fZ8n8sJ47jogc-JpkidszrarIseZKkeDBSm8RpjDc

 

[EdGs]

Hey I’m reinstalling mine and I wasn’t able to find a o ring with it, do I need an o ring for it or doesn’t?

I believe it should have an o-ring. On my '15 SLT, the part # was 53021144AA. Not sure if same for you.

LOL, I'm late to the party, forgot to hit "post reply"