redram77
Junior Member
- Joined
- Jun 11, 2015
- Posts
- 7
- Reaction score
- 0
- Ram Year
- 1996 and 2004 1500's, 2006 2500 cummins, 1979 macho power wagon 360cid
- Engine
- 318 and 5.7 hemi, cummins, 360cid
have a 2004 ram with 5.7 and AWD, 300,00km on it with zero major issues besides regular maintenance and the following problem.
truck has had a noticeable drivetrain vibration at crusing speed which gets worse on the decel (worst around 55mph decel) obvious culprit was the u-joints so I checked those and they are all fine but replaced just to be sure. got it back on the road and still same problem. Have also replaced both front CV axle shafts and no difference. Not sure what else to look into at this point.
Any one have any advice?
truck has had a noticeable drivetrain vibration at crusing speed which gets worse on the decel (worst around 55mph decel) obvious culprit was the u-joints so I checked those and they are all fine but replaced just to be sure. got it back on the road and still same problem. Have also replaced both front CV axle shafts and no difference. Not sure what else to look into at this point.
Any one have any advice?