usaf2006
Senior Member
- Joined
- Mar 28, 2014
- Posts
- 4,518
- Reaction score
- 1,574
- Location
- Augusta, GA
- Ram Year
- 2008
- Engine
- Hemi 5.7
Currently my rear is 3.5" higher than my front...lol... any way I could do a 4.5" drop in the back and just 1" up front for level? Is just one inch up front possible?
If not can you find the drop spindles (4wd truck, spindles the only way?) Under $400+? Id be doing a flip kit in the rear as well that way.
Regarding a flip kit. How big of an issue is pinion angle. Id be okay doing it myself and getting the perches welded if I knew that if the pinion angle was close enough, that my rear end wouldnt blow up.
Thanks
If not can you find the drop spindles (4wd truck, spindles the only way?) Under $400+? Id be doing a flip kit in the rear as well that way.
Regarding a flip kit. How big of an issue is pinion angle. Id be okay doing it myself and getting the perches welded if I knew that if the pinion angle was close enough, that my rear end wouldnt blow up.
Thanks