Front End lower than back

[ben.orts]

If you look at my pics or most 03-05 1500's there is a black plastic strip under the bumper and I want to remove it to make it look bigger from the front. I looked underneath and there is only 5 or 6 bolts connecting it to the bumper but two of them are hidden in some sort of bumper/truck connection. Anyone removed this or know of an easy way to?

 

[4x4Hemi]

throw some big weights in the back

 

[ben.orts]

I switched titles because I thought of a way to make it look even.

 

[4x4Hemi]

man now my post looks random

 

[4x4Hemi]

I have removed that from my truck though, accidentally while mudding lol. If their the same type of clips as the 4th gen, all you need is a screw driver to pry them apart

 

[ben.orts]

I wish it was but i have to use a socket to get them off. There are 3 of them that are easily accessed but 2 are hidden and i'm thinking that I will have to unhook my bumper to take it out. And yeah your post that looks random would probably work lol.

 

[TexasRammer]

Lol i got confused at first... I removed mine, no need to take the bumper off

 

[ben.orts]

You know what I'm talking about when it comes to those hidden ones right? How did you get to them??

 

[TexasRammer]

I slightly remember them. It was a little work but i somehow managed to get a socket or wrench in there...

 

[ben.orts]

Ok now that I know its possible I will get to work on that tomorrow. Thanks!

 

[TexasRammer]

No problem, i just cant remember how i did it, it was so long ago lol

 

[ben.orts]

Lol no problem i'll give it a shot.

 

[ben.orts]

Got the plastic strip off

 

[4x4Hemi]

Nice man, looks way better

 

[TexasRammer]

Nice, and if you want you can bolt up your license plate using the bottom holes like I did. I lost mine when it was hangin down when I went mudding one time lol

 

[Hemi450hp]

Nice, and if you want you can bolt up your license plate using the bottom holes like I did. I lost mine when it was hangin down when I went mudding one time lol

As I was reading this, I was going to suggest the same thing. On the 4wd trucks, the bumper looks much better with that lower valance removed.

 

[rennaissanceman]

How did you end up getting those two bolts? I took mine off a while ago but never could figure out how to remove them.

 

[ben.orts]

Ok I will move my license plate soon. And I had a small socket that i was able to fit my hand in that small hole (you probably know what im talking about).It took like 4 minutes for each one but mainly because you can only move the handle 1/8th of a turn each time.
You said you did get it off?

 

[ben.orts]

And thanks 4x4 hemi

 

[bigbadram1500]

looks nice