Headers???

[BEAST19]

Any suggestions on headers??? I have a 2015 ram 1500 with the 5.7L 8 speed . K&n intake and mbrp exhaust. Running Hemifever tune off diablo i2 ... Looking to get the most out of it. How much should I expect to b charged for install and what gains should I expect????


Sent from my iPhone using Tapatalk

 

[Robocop_9]

Go long tunes and y pipe for the most gains. Moes performance can hook you up.


Sent from my iPhone using Tapatalk

 

[BEAST19]

Go long tunes and y pipe for the most gains. Moes performance can hook you up.


Sent from my iPhone using Tapatalk

Thanks how much does it cost for install any.idea??


Sent from my iPhone using Tapatalk

 

[Gamester]

Get long tubes and a y-pipe from ARH and good to go. Install price will vary a lot depending on your area and shop, but will probably be around 500-700 as headers in general can be a major pain in the rear to install.

 

[Txhemirt]

Running jba headers and oem gaskets with y pipe. No cats. I had them installed for around 450. What hood do u have rivers. Looks sick. Got the LTs from Moe's

 

[BEAST19]

Whst do I do for cats? I see options that have long tubes and headers with or without cats..... Looking like 1600$+ from.moes without headers ...


Sent from my iPhone using Tapatalk

 

[BEAST19]

Get long tubes and a y-pipe from ARH and good to go. Install price will vary a lot depending on your area and shop, but will probably be around 500-700 as headers in general can be a major pain in the rear to install.

Do I get them with or without cats ? Without them will it cause me to fail inspection ? I live in NY


Sent from my iPhone using Tapatalk

 

[Txhemirt]

Do I get them with or without cats ? Without them will it cause me to fail inspection ? I live in NY


Sent from my iPhone using Tapatalk

Depends on your state emission laws, you will have to look into that. What hood do u have and where did you get it.

 

[BEAST19]

Do I get them with or without cats ? Without them will it cause me to fail inspection ? I live in NY


Sent from my iPhone using Tapatalk

Its from amerihood I got it off eBay for 640$+$200 shipping
http://m.ebay.com/itm/391600139244?_mwBanner=1


Sent from my iPhone using Tapatalk

 

[CTD]

Whst do I do for cats? I see options that have long tubes and headers with or without cats..... Looking like 1600$+ from.moes without headers ...


Sent from my iPhone using Tapatalk

Just ordered a set from Moe's yesterday. I got mine with the cats. I don't have any kind of inspection, it was just my personal preference.

If they do a visual inspection or sniffer where you live then they can and probably will fail you.

 

[Hipps2000]

I am in CT.... I did ARH long tubes with high flow cats...I also have the magnaflow 16869 cat back exhaust kit.

One recommendation I will tell you is get the headers and y pipe ceramic coated inside and out! This is way to go...cost about 300/375 but totally worth it for heat and flow....once these babies are installed you don't want to screw with them. I also used new oem gaskets and stage 8 locking header bolts.

My ram dealer installed them for me...ARH bolt right up...you just need to adjust the oil dipstick. They charged me $500. Well worth it....then get hemifever to tune it for you....next clutch fan delete....and 180 stat with the ATI dampener pulley....really wakes truck up! I just ordered a pedal commander that came in today....got a new tune from Sean so I can now adjust pedal response 36 choices on the fly. He has a special on these $269. Do the headers right the 1st time it's pricy but worth it...I have had them for 2 years now. Oem manifolds suck a$$.

 

[Captain_X]

Are you dead set on headers? Why not a cam?


Sent from my iPhone using Tapatalk

 

[BEAST19]

I am in CT.... I did ARH long tubes with high flow cats...I also have the magnaflow 16869 cat back exhaust kit.

One recommendation I will tell you is get the headers and y pipe ceramic coated inside and out! This is way to go...cost about 300/375 but totally worth it for heat and flow....once these babies are installed you don't want to screw with them. I also used new oem gaskets and stage 8 locking header bolts.

My ram dealer installed them for me...ARH bolt right up...you just need to adjust the oil dipstick. They charged me $500. Well worth it....then get hemifever to tune it for you....next clutch fan delete....and 180 stat with the ATI dampener pulley....really wakes truck up! I just ordered a pedal commander that came in today....got a new tune from Sean so I can now adjust pedal response 36 choices on the fly. He has a special on these $269. Do the headers right the 1st time it's pricy but worth it...I have had them for 2 years now. Oem manifolds suck a$$.

Thanks for the info!! Where do u get em ceramic coated? Arh doesn't sell them done already ??


Sent from my iPhone using Tapatalk

 

[BEAST19]

Can u send me a link on the OEM gaskets and locking header bolts


Sent from my iPhone using Tapatalk

 

[Hipps2000]

No ARH does not sell coated. I got mine done locally but many send them to jet-Hot to get them done. The Oem gaskets got at the dealer. Google stage 8 header locking bolts Ram. Bought off amazon for $50. I did buy headers and tuner from Matt at Moes. I would highly recommend you get them coated inside and out....mine still look new...it protects them...better flow...and reduces engine bay heat.

 

[CTD]

No ARH does not sell coated. I got mine done locally but many send them to jet-Hot to get them done. The Oem gaskets got at the dealer. Google stage 8 header locking bolts Ram. Bought off amazon for $50. I did buy headers and tuner from Matt at Moes. I would highly recommend you get them coated inside and out....mine still look new...it protects them...better flow...and reduces engine bay heat.

I thought stage 8 locking bolts come with ARH headers?

 

[Hipps2000]

No you have to buy the kit just google stage 8 hemi 5.7l about $50

 

[predat-r]

Yo tha truck looks beast man really luv how it all comes together.

Sent from my SM-N920P using Tapatalk