headlight wiring

[mocaby73]

I have quad lights with morimoto mh1s in the low beam spot. Was wondering if there was a way to make all 4 bulbs stay on all the time. My highs aren't hids I was thinking about putting red led bulbs in them since I have red led halos on my projectors.

 

[mocaby73]

Nobody?

 

[0212353]

you want all 4 on in low beam mode?

And you do know that IL will pop the hell out of you for a red front facing light right?

 

[mocaby73]

Had a state cop pull me over a little while back. Never gave me any grief over my red halos so Im not worried about that. Just wondering how and if I could do it?

 

[0212353]

It can be done.....just tap the high to the low.

 

[EdmontonSS]

You can pick up a jumper harness from almost any shop that sells HID kits, or you can just use wire and cross the input signal for the Hi/Lo's so that when the lo's are on, the hi's are getting a signal as well. You can either do this at the factory plug, or at the bulb. I recommend using some spade connectors and wire at the plug, so its not permanent and you dont end up cutting your harness.