Help. Egr vavle

[Abather Almajedi]

Hey what's up? I bought a Mopar EGR valve. I went to remove the bolts and I managed to remove 3 but one bolt. The last one is bad because edge became round. I'm thinking about welding with 10mm socket to bolt then use ratchet to unscrew it... is that good idea? Please see a picture. I draw it on pic.

 

[TERRY G ABNEY]

If your going to weld , just use a nut with good sides an save the socket , or buy a nut extractor socket , there made for rounded sides on bolts an nuts

 

[Abather Almajedi]

It's all good now. I used socket with 12 hex and hammer it. Bam! I got it out.