Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sorry to hear that. I've had good results with them before, but it has also been a bit. Not sure what you can do at this point...
You know, you might be able to find one at a junk yard - I'm sure there's a few wrecked RAMs that have perfectly fine ignition switches/housings. You'll have to call around, but the part number will definitely help. Also, you should be able to use any switch from the same generation of RAMs (3rd Gen in your case) - but, you might also be able to use one from either an earlier (2nd) or later (4th Gen). Most hardware doesn't really change a lot within the same generation, and even in between different generations, most of the changes are computer/engine/drive train, and styling changes, but simple electrical switches are often the same for four or five years if not longer.
