Infinity speaker replacement issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Mando87

Junior Member
Joined
Jan 17, 2018
Posts
1
Reaction score
0
Location
Dallas
Ram Year
2004
Engine
Hemi 5.7
Greetings everyone, I have a 2004 Dodge Ram 5.7 hemi with infinity audio I bought some new Infiniti speakers to replace my old ones and when I connect them I have no sound nor from the old ones any help is appreciated thank you
 

Fast69Mopar

Senior Member
Joined
May 10, 2019
Posts
2,431
Reaction score
2,646
Location
Texas
Ram Year
2006
Engine
5.7 HEMI
Greetings everyone, I have a 2004 Dodge Ram 5.7 hemi with infinity audio I bought some new Infiniti speakers to replace my old ones and when I connect them I have no sound nor from the old ones any help is appreciated thank you
With the truck being 21 years old as well as the original Infinity speakers and amplifier I would suspect that the amplifier has failed or it is not receiving an audio signal from the radio.

Get a printout for the radio and amplifier connectors and make sure the amplifier is receiving B+ battery voltage and a good ground.

To test the speaker wiring from the radio and amplifier connectors you can use a 9V battery to power the circuit to the speaker. You will hear a little pop or a crack when you power the circuit because it will flex the voice coil. This is where I'd start my diag.
 
Back
Top