zatiny8sv
Junior Member
Hi guys,
Purchased a used RAM and put a LEER 100XL Canopy on it. Was planning on connecting the Third brake light and did my research and learned that I needed to connect the red wire from the canopy to the white with brown stripe wire underneath the bed, and ground the black wire from the canopy -- easy peasy.
Well, when I removed the taillight I noticed that the previous owner already had some sort of wiring harness installed. I traced the wires:
A: Comes from the White w Brown stripe wire
B: Goes to the Trailer Connector
C: Comes off the Taillight bulb
.....I'm terrible with electronics, so wanted to ask you guys:
1. Where do i connect the Red wire from the canopy, now?
2. Do these existing harnesses make it possible for me to easily connect the dome light from the canopy, as well (instead of running a wire from the battery for constant power)
Appreciate the help, Thanks!
Purchased a used RAM and put a LEER 100XL Canopy on it. Was planning on connecting the Third brake light and did my research and learned that I needed to connect the red wire from the canopy to the white with brown stripe wire underneath the bed, and ground the black wire from the canopy -- easy peasy.
Well, when I removed the taillight I noticed that the previous owner already had some sort of wiring harness installed. I traced the wires:
A: Comes from the White w Brown stripe wire
B: Goes to the Trailer Connector
C: Comes off the Taillight bulb
.....I'm terrible with electronics, so wanted to ask you guys:
1. Where do i connect the Red wire from the canopy, now?
2. Do these existing harnesses make it possible for me to easily connect the dome light from the canopy, as well (instead of running a wire from the battery for constant power)
Appreciate the help, Thanks!