Lets see those 1500's on 37's...I'm getting the itch to go bigger

[R.L.K.]

@Hemi450hp ,
I LOVE the wheels and the big sidewall look !!!!



Sent from my SM-G930V using Tapatalk

 

[Heucobob]

2016 1500 20x12-44 37x12.5 nitto ridge grapplers . 6in lift.

 

[Dangulo]

Can you guys post pics of how close those tires are to the front bumper when turning?? My 35's clear but seam so close. I'd hate to go 37's and I'm rubbing like crazy

 

[JB1]

My 37’s on 20x9 -12 offset and 8.5” lift rubbed just the lower tip of the plastic bottom airdam. I trimmed it up and now I have several inches

 

[[email protected]]

2016 ram 2500 5.5 lift BDS Fox 2.0. 20 inch fuels and 37's. I know you guys said 1500 but couldn't help my self.

 

[blackbeautyhemi]

2016 1500 20x12-44 37x12.5 nitto ridge grapplers . 6in lift.

View attachment 117118

View attachment 117119

View attachment 117120

What lift and do you have bilsteins in the front?

 

[Heucobob]

Mine is a 6in rough country. I have no rub at all U have to bend some of the pinch weld back . And they will fit great

 

[Dangulo]

My 37’s on 20x9 -12 offset and 8.5” lift rubbed just the lower tip of the plastic bottom airdam. I trimmed it up and now I have several inches

View attachment 117130

View attachment 117131

Can you post a pic of the tire turned at the closest point to the fender? Great looking truck!

 

[Mmathw]

2017 1500 cc sport, 6.5ft bed, 6”rough country, 1.5” zone body lift, 20x10 Fuel Hostage -24 offset, 37x12.50r20 Nitto Ridge Grapplers. Covered in salt needs a bath bad


Sent from my iPhone using Tapatalk

 

[JB1]

looks damn good ^^^

37's just fit the fender opening radius perfectly

 

[Mmathw]

looks damn good ^^^

37's just fit the fender opening radius perfectly

Thanks!!


Sent from my iPhone using Tapatalk

 

[blackbeautyhemi]

What for mpg’s are you guys getting? Just wondering how much I’ll drop from where I’m at now with 35’s.

 

[Mmathw]

What for mpg’s are you guys getting? Just wondering how much I’ll drop from where I’m at now with 35’s.

Just put them on so don’t have too much to go off of but 40 miles all highway (set cruise at 60) on my way home from work last night with winds gusting to 30-40 mph EVIC showed 17.8.


Sent from my iPhone using Tapatalk

 

[Wramey]

2017 1500 cc sport, 6.5ft bed, 6”rough country, 1.5” zone body lift, 20x10 Fuel Hostage -24 offset, 37x12.50r20 Nitto Ridge Grapplers. Covered in salt needs a bath badView attachment 117194View attachment 117195


Sent from my iPhone using Tapatalk

That grille is awesome. Where did you get it?

 

[Mmathw]

That grille is awesome. Where did you get it?

Thanks! Got it off eBay for $229. Don’t know how to post a link on here but if you go to eBay and search eag grille Ram 1500 it’ll show up. I just took the ram head emblem off the original grille and put it on there


Sent from my iPhone using Tapatalk

 

[[email protected]]

For mpg on my 2500 with the 6.4 hemi 37×12.5 on 20's with 3.73 gears about 10 lol and running 93 gas in it. Putting 4.56's in at the end of the month and K&N cold air intake probably won't help but it will be fun.

 

[Hitman0002]

20x10 -24 offset 37in procomp AT sports. 6in suspension 3in body

 

[2010 Infantry Vet]

2010 1500 SLT 6" lift 37x12.50x20 toyo MT. Not sure what brand lift, bought it this way. I plastidipped the grille, and added led projector headlights and step bars. Im not a toyo fan, when they wear out, im getting nitto trail grapplers. 60k+ miles i got on my last truck.

 

[6.7CumminsDrvr]

Difference in diameter won’t affect the change in MPG as much as the change in rolling mass (going 35 to 37). Check the weight difference.........

 

[MachineCore]

Looking for similar look to this.

I am new to the forum. I've lifted multiple trucks in years past but need some insight. Jb1 recommended I follow this thread. I have a 2017 4wd Ram 1500 5.7l, looking to run at least 37 or 38's on 22x12 wheels preferably. I was recommended to run the 6" lift with bilsteins cranked up to get the 8" I want. I have no problem adding a body lift as well. But truly would like around 10" of lift to run 38's. Any other suggestions? Wheel offset recommendations? Thank you everyone in advance.
Craig