Leveling kit

[Ramgrrl5]

Just got a leveling kit on today, going ro go pick her up now to see how she looks. Will post pics later
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[GlOcKnRaM]

Sweet! You'll like the look!

 

[Ramgrrl5]

Ok here it is,I know its a small change but its a start. I could tell a difference when I pulled into the place. Especially after I dropped it off. Im kinda short so I have to kinda of climb in lol. But it looks good and im happy with it. Plus getting new tires and rims on tuesday so she is going to have a better stance once those are on, I cant wait
Before:


After:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[White Beauty]

looking good!!!

 

[KGBIGCOUNTRY]

Looks good, what rims and tires you going with?

 

[Boulevardvette]

Nice!!

 

[bigbadram1500]

Sweet

 

[jp3]

How's it ride and what kit did you get?


JP3 for threeeee

 

[07rambot]

How's it ride and what kit did you get?

Ditto!!!

 

[NWRQC]

How's it ride and what kit did you get?


JP3 for threeeee

She paid for aftermarket keys to be installed (assumable) .. It's going to ride the same as stock keys cranked. Crank your stock keys and you'll see the same result but for free......

 

[Uhl1982]

She paid for aftermarket keys to be installed (assumable) .. It's going to ride the same as stock keys cranked. Crank your stock keys and you'll see the same result but for free......

How much crank would one need to do?

 

[NWRQC]

Lift the front end up so the tires are off the ground. I would do two or three complete turns each then lower the truck and take it for a spin around the block. Measure the difference then turn accordingly.
2" is usually good, but some like 2.5" raised. I wouldn't go past 2.5", but I would stay closer to 2"-2.25".
I've cranked my fair share of torsion bars and so far I haven't had any issues, just don't over do it.
The adjuster bolts are at the front end of the torsion bar (front of truck) and face down.