leveling kit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

evand22

Junior Member
Joined
May 4, 2015
Posts
1
Reaction score
0
Ram Year
2013 dodge ram 1500 quad cab
Engine
hemi 5.7l
hey guys i have a 2013 ram 1500 sxt, i want to lift it but the price dif to a leveling kit is pre big, my question is if i put a ready lift leveling kit 2.5 front and 1.5 rear, what is a good size tire/ rim, and what is max i can run without worrying about rubbing? and what about offset?
 

Undecided

Member
Joined
May 19, 2014
Posts
31
Reaction score
0
Location
Kakabeka Falls, Ontairo Canada
Ram Year
2013
Engine
5.7
Spending time reading here is a good place to start. This question gets asked a lot.

You can fit 35s with a level kit if you have the right offset rims to avoid rubbing. Spacers are another option to deal with the offset. Read up on the upper control arm issue on the 2013 trucks. Some get away with leveling without changing them, some dont. Not a chance I'm going to take with mine though.
 

Klaus96

Senior Member
Joined
Jan 14, 2015
Posts
301
Reaction score
80
Location
Illinois
Ram Year
2014 2500 CC Laramie 4x4
Engine
6.7 Cummins
I just had the max trac 2 piece spacer put on TODAY! Supposed to alleviate the ball joint issues by using a coil spacer and a strut spacer. So far, so good, but again it has only been 15 miles...haha


2.5" Level
 
Back
Top