Muffler Tips

[B_Hansen]

Does changing the stock Exhaust tips to 5" tips make much of a difference in sound?

 

[Pull Ya]

Yes--a deeper sound and more mellow.
Jay

 

[Nick@GotExhaust]

It does make the exhaust note a bit deeper. We can get you set up with the Carven 5" tips

You can find them listed here
https://gotexhaust.com/c-1183874-ram-owners-preferred-products.html

then use promo code CARVEN5 for a discount and FREE shipping!

 

[Pull Ya]

Moe's Performance also sells 5" tips. A preferred vendor on this site.
Jay

 

[B_Hansen]

Moe's Performance also sells 5" tips. A preferred vendor on this site.
Jay

Thanks! Trying to improve the sound a little right now before having to drop 1000+ on an entire Exhaust system

 

[Nick@GotExhaust]

Thanks! Trying to improve the sound a little right now before having to drop 1000+ on an entire Exhaust system

What exhaust system are you thinking about? There is also muffler kits available that are much cheaper than a full catback if your interested. Message me if you would like a quote on anything

 

[Pull Ya]

I was surprised at the difference in sound that my exhaust made. It almost made more difference than the aftermarket muffler I installed--Magnaflow 22".
Jay

 

[B_Hansen]

What exhaust system are you thinking about? There is also muffler kits available that are much cheaper than a full catback if your interested. Message me if you would like a quote on anything

Just browsing right now. But i will keep that in mind!

 

[Nick@GotExhaust]

Just browsing right now. But i will keep that in mind!

So you know some very popular catbacks are Corsa, Borla, and Solo Performance. Popular muffler kits are Carven and Solo Performance. We offer many other options too but these are the most popular and recommended.

 

[wallacemf]

It does make the exhaust note a bit deeper. We can get you set up with the Carven 5" tips

You can find them listed here
https://gotexhaust.com/c-1183874-ram-owners-preferred-products.html

then use promo code CARVEN5 for a discount and FREE shipping!

What tips do you have for a 2018 2500 with the 6.4L? I think the tailpipe is 3"?

 

[corneileous]

Yes--a deeper sound and more mellow.
Jay

I was kinda curious how my Carven Progressive woulda sounded like with the stock tips.

If those polished stainless Carven 5” tips didn’t look so sexy, I might try them some day....


Sent from my iPhone using Tapatalk Pro

 

[Nick@GotExhaust]

What tips do you have for a 2018 2500 with the 6.4L? I think the tailpipe is 3"?

Yes the tail pipe is 3". any universal 3"inlet shorter length tip would work. I personally used a lack MBRP slant cut tip. I'm not in the office right now but if you message me I can send you some options and pricing later.

Sent from my SM-G965U using Tapatalk

 

[wallacemf]

Yes the tail pipe is 3". any universal 3"inlet shorter length tip would work. I personally used a lack MBRP slant cut tip. I'm not in the office right now but if you message me I can send you some options and pricing later.

Sent from my SM-G965U using Tapatalk

Nick, are you sure the 6.4L is a 3 inch inlet? I measured it and it seems to be at least 3.5 inch inlet....

I think the 5.7L is a 3 inch

 

[cyclepuck]

Nick, are you sure the 6.4L is a 3 inch inlet? I measured it and it seems to be at least 3.5 inch inlet....

I think the 5.7L is a 3 inch

You are correct the 6.4 is 3.5".

 

[2010 Infantry Vet]

6" tips give an even deeper sound. And fill the bumper gap on a truck with a body lift.

 

[Ohio5pt7]

Thanks! Trying to improve the sound a little right now before having to drop 1000+ on an entire Exhaust system

I did a muffler delete with a magnaflow xpipe best 150 I've spent sounds awesone

 

[corneileous]

6" tips give an even deeper sound. And fill the bumper gap on a truck with a body lift.

Yes they do....[emoji846]

Can’t imagine what my Carven Progressive would sound like with the stock tips. Don’t think I care to find out...[emoji41]


Sent from my iPhone using Tapatalk Pro

 

[Nick@GotExhaust]

Nick, are you sure the 6.4L is a 3 inch inlet? I measured it and it seems to be at least 3.5 inch inlet....

I think the 5.7L is a 3 inch

Sorry my mistake, I was thinking the 5.7. The 6.4 IS 3.5" for sure

 

[razor1]

Yes they do....[emoji846]

Can’t imagine what my Carven Progressive would sound like with the stock tips. Don’t think I care to find out...[emoji41]


Sent from my iPhone using Tapatalk Pro

I have a Carven R with stock exhaust and a Vararam intake, fantastic sound. Drone does not bother me at all.

 

[Magnaflow]

We also offer a number of universal clamp-on and weld-on tips, though not quite as large as 5" dia. You can check out the ones we offer here on our site: https://www.magnaflow.com/automotive-performance/tips/truck-suv/