My 2003 Quad Cab lowering and parts install

[seveer13]

I have the same wheels that funny, anyhow I'm just getting ready to order my lowering kit tonight. I'm just unsure if I should do spindle or spring kit and I cant get an answer either way from anyone its driving me nuts... But I am glad to see your post about the front end I wasn't sure if I wanted to do 4 in front or 2. You helped on that one theses roads here suck too much to mess with the 4.

 

[ercmesser]

You should do A spindle kit. If the roads are worst then here, I wouldn't do a 4/6. I have a 4/6 drop (spindle/ springs and flip kit) rides beautiful, rubs just a little. Just make sure you get new shock if the kit doesnt have them and sway bar end link bushing, cause you are going to have it apart. Better to do it once than twice.

 

[TheSatinPumpkin]

lowering spindle keep close to stock alignment geometry as well as the ride. Drop coils may take some time to get aligned correctly and imo more stiffer than stock springs. lowering spindles are heavier than stokers and you may or may not have issues clearing 17's.
4/6 McG' Kit


Swype-n from my Galaxy Note