RPMRamFury
Member
- Joined
- Apr 22, 2012
- Posts
- 48
- Reaction score
- 25
- Location
- ND
- Ram Year
- 2004,2005,2012
- Engine
- Magnum 5.7 HEMI
This whold build is awesome. Please keep us updated, the truck looks so tough!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I plan on doing arh 1-3/4 with cats. I’ll let you know when I’m ready. Most likely be towards the end of the year as We just recently purchased our first home. I will be purchasing Clayton control arms for the rear.Sounds like a good time to swap out to some Core 4x4 control arms! We can help you out with them.
Also let us know when you are ready for the headers and a bumper! Headers We would recommend ARH or SW.
I plan on doing arh 1-3/4 with cats. I’ll let you know when I’m ready. Most likely be towards the end of the year as We just recently purchased our first home. I will be purchasing Clayton control arms for the rear.
The Core arms seem flimsy compared to the Clayton arms. Those things are absolute tanks.I plan on doing arh 1-3/4 with cats. I’ll let you know when I’m ready. Most likely be towards the end of the year as We just recently purchased our first home. I will be purchasing Clayton control arms for the rear.
Yea. Ram1500rsm got me wanting those. I saw when he installed them on his truck. The lower arms are 2” square tube 1/4” wall and the uppers are 3/16” wall. They’re solid arms.The Core arms seem flimsy compared to the Clayton arms. Those things are absolute tanks.
It’s a barricade hd bumper from American trucks. The gear knob is from ajtdesign@crazykid1994 Who makes the front bumper and the shift knob? May have missed it but couldn't find that info listed anywhere in the thread.
Cool would this be your sway bar disconnect ? how long is it ?Received some kryptonite sway bar links. Ordered the gm ones. I need to modify the bolt in the u bracket. It’s a 1/2” bolt. I’ll have to figure out the size of ours and just tack weld a new bolt in. Should not be a problem. I may email them and see if they will make a ram specific set. Possibly in an 8” length for leveled trucks.
View attachment 238584
Yes. I’m going to use a push pin through the u bracket instead of a bolt to go through the lower bushing. It’s 7.5” from mount to mount. I’m hoping they email me back on a ram specific version that is 8” in length. It would be perfect for our trucks in my opinion. The upper bushing that goes to the sway bar looks just like the ones for your suspensionMaxx links. I think they are poly. Or I’ll drill a hole through the bolt and use a latching pin in the hole to lock the bolt from falling outCool would this be your sway bar disconnect ? how long is it ?