Need a favor 2wd guys.

[Limeybastard]

Can you please look behind your front wheels and tell me if you see any grease residue around the back bearing area of the sheek similar to the pics.
Many thanks.

Sent from my SM-N910T using Tapatalk

 

[Hemipower392]

I just looked, I have no build up of grease or any residue

 

[Limeybastard]

I just looked, I have no build up of grease or any residue

Thanks. Both my fronts hubs were like this,cleaned it up a few hundred miles ago and checked for play but all seems okay. Hard to believe both hubs have the exact same issue. Must have occured from new as noticed it at 10k miles.
Originally I thought it was me applying too much anti sieze on the hub face when I changed out my rims 8 k miles ago.. But today I did a tire rotation noticed I hadn't even applied any anti seize lol.

Sent from my SM-N910T using Tapatalk

 

[Limeybastard]

Cleaned up pics. Also the lower ball joint is it? Rubber boot looks crooked.

Sent from my SM-N910T using Tapatalk

 

[Farmer Fran]

Now that is clean!

 

[Limeybastard]

Can anyone else please check theirs?

I cleaned it up and after 2k miles there seems to be a little more grease coming out.

Checked for wheel play with wheel off the ground. Non present.

Sent from my LG-H901 using Tapatalk

 

[THETANK]

nice job cleaning, none on mine but I am at 600 miles and it has never been out in the wet.

 

[scotts2012ram]

We have a 5500 at work that did that on one side then the bearing failed not long after

 

[Limeybastard]

Its been like this since new. Only cleaned it up at around 10k miles.

Always checking **** under truck when doing oil changes or mods.

Sent from my LG-H901 using Tapatalk

 

[bigredram13]

Have to look

 

[hemihustlin]

I wouldnt worry about it. Untill it stops leaking. Then i would wonder if there is any left? Lol