new exhaust help.

[05singlecabHEMI]

im planning on redoing my entire exhaust. its covered in mud that i cant get off. and i hate looking at that. i plan on getting Long tube headers, not sure if i want cats. if i dont get cats ill get O2simulators. 3in pipe all throughout, my cutout, not sure on muffler and tips. also debating on going True dual.
what do yall think? need some oppinions on brands to get and on headers, mufflers, cats, and tips. or im thinking just forget the muffler and cutout and go straight pipe with no cats.
still in the thinking process and not sure when it will all get done. but ive wanted to do my exhaust for a while now.

thanks
-Nick

 

[swamp_life hemi 05]

I'm redoing mine soon. From the collector with 3" pipe (eliminated the cats) to a 3" Y, out to a 3" pipe into the flowmaster super 44 which I already have. Then dumped right after. All in all its only goin to run about $200 with exhaust shop only doin the pipe from the collector to the Y pipe. I'm getting the Y and the 3" pipe off of eBay. And my roommate is welding so its gonna be a complete budget build lol hope this helps

Droid Incredible 2 on the move!

 

[OlDirtyJohn]

if you end up going duals, dont go dual 3", bump it down to something like dual 2.5"

 

[txbass06]

if you end up going duals, dont go dual 3", bump it down to something like dual 2.5"

This. Even if you went with a y and kept it single from there back, I think 3" would be overkill


Sent from my iPhone 4 using Tapatalk

 

[nim81]

as for brands i would go with magnaflow 100%!!!!!!

 

[05singlecabHEMI]

i was thinking magnaflow also. i want to go straight pipe but i think it might be a little to loud. i want a nice deep rumble. but loud and mean at WOT
now that i have a new job i have a ton of ideas bouncing around.

 

[BlackedOutHemi]

Ive got the magnaflow 18", with the Pacesetter LT headers and hi-flo cats. Its a nice rumble at low speeds, and when you go WOT its really loud. I'd go with a 14" if I were you though.

 

[05singlecabHEMI]

Ive got the magnaflow 18", with the Pacesetter LT headers and hi-flo cats. Its a nice rumble at low speeds, and when you go WOT its really loud. I'd go with a 14" if I were you though.

do you have any sound clips? and with the Hi-flo do you have a Check engine light?

 

[BlackedOutHemi]

I did. But I just bought some non-foulers from 3rdStrike, and no problems now. Non of the sound clips I get do justice. But I can try. Lol. Have to let the camera charge first.

 

[05singlecabHEMI]

non foulers? never heard of those. the simulators?

 

[BlackedOutHemi]

Yeah. The same thing.
Oxygen Sensor Mechanical Simulator Oxygen Sensor Mechanical Simulator; O2 Sensor Mechanical Simulator [O2 Sensor Mechanical Simulator] - $10.95 : 3rd Strike Performance!!, Mopar, GM and Ford Performance Parts-Aftermarket Accessories!!

 

[05singlecabHEMI]

so you plug that in and then put the sensor in that? seems simple.

 

[BlackedOutHemi]

Very much so. Just take out the rear sensor, put this in it's place, and then put the rear sensor on top of it. No more emissions codes. Lol.

 

[quietpeen]

did you decide what to get yet?

 

[05singlecabHEMI]

Nope. I dont get paid till the 25th. I know im gonne get pace setter long tube headers for sure. Still deciding on everything else. I also know i want to get all new piping. Maybe ill buy a programer first and think about the exhaust some more. Also want hi flow cats. Not sure of muffler or tips or if i want true dual. Lots of thinking going on. Haha

 

[05singlecabHEMI]

i have decided im gonna save my money somemore. get some in my pocket and then spend. figured this would be for the best.

 

[quietpeen]

never hurts to have some money saved up

 

[05singlecabHEMI]

never hurts to have some money saved up

i agree, that way, if something goes wrong i have money saved up. maybe do some small mods here and there.