Oil Change
- Thread starter pullinair
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
mtnrider
Senior Member
- Joined
- Sep 25, 2014
- Posts
- 3,538
- Reaction score
- 4,299
- Location
- Georgia
- Ram Year
- 2016
- Engine
- 6.7 Cummins
Yes you need to reset it. This should be the instructions for a 2010..
"Turn the ignition switch to the "ON" position. Do not start the engine.
Fully press the accelerator pedal slowly three times within ten seconds.
Turn the ignition switch to the "LOCK" position.
Note: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat these steps."
.
"Turn the ignition switch to the "ON" position. Do not start the engine.
Fully press the accelerator pedal slowly three times within ten seconds.
Turn the ignition switch to the "LOCK" position.
Note: If the indicator message illuminates when you start the engine, the oil change indicator system did not reset. If necessary, repeat these steps."
.
