I would get parking light out within 30 seconds of starting the truck, only later after I messed with disabling the i/o door ajar did I start getting turn signal out when I used them.
I have another vehicle I mostly drive so it took me a while with enabling and disabling things but maybe yours finally adjusted right.
Alpharex told me I only needed to change two settings with AflaOBD and I tried disabling and enabling just those two a dozen times and sometimes the truck sat for a week or two before being drove which I don't think helped.
I read another guy ran his 4 ways for a little bit and it fixed itself I tried that right before the resistors and I ended up with it saying all 4 of my turn signals were out! After that I would clear those and instantly they would come back I had to shut the key off fast after the last clear to finally get it cleared out, than I put the resistors in which by the way is fairy easy and only took about half hour although wished they would have just included them, on their tail lights you can see the resistor...
Went driving this afternoon and couldn't get the warning to come on, even with the headlights on manually or in automatic mode. Maybe something finally clicked. I'll find out in a few hours when I drive to work. Otherwise I'll be ordering those resistors later on.