mhylman
Junior Member
- Joined
- Jul 24, 2013
- Posts
- 29
- Reaction score
- 4
- Location
- Terre Haute, IN
- Ram Year
- 2004
- Engine
- 5.7 Hemi
Hello everyone I'm new here and never posted anything on any forum.
I have a 1997 ram 5.9 gas with nv4500 5 speed trans. 136k miles
I'm having an issue figuring out what it wrong with my truck. When it idles it has a bump to it it's not random it's every revolution but only when idling and no loss of power at all. When it started doing it I pulled my buddy from a sand pit and after unhooking got in felt it bumping and had CEL took it home scanned it and almost every cylinder was misfiring along with random/muiltple. Full tune up still the same everything was warranted so did the tune up again I've learned just because it's new doesn't men it good and still the same. But I've driven it any way. Has new tune up new timing chain new water pump new heater core new crank sensor new idle air control sensor. I've check fuel pressure cylinder compression plugs look like they are perfect color. After the timing chain cleared codes and been driving it light came on for random/multiple and cylinder 6 as of right now
Does anyone have a clear to stop the bump and get rid of the CEL
I have a 1997 ram 5.9 gas with nv4500 5 speed trans. 136k miles
I'm having an issue figuring out what it wrong with my truck. When it idles it has a bump to it it's not random it's every revolution but only when idling and no loss of power at all. When it started doing it I pulled my buddy from a sand pit and after unhooking got in felt it bumping and had CEL took it home scanned it and almost every cylinder was misfiring along with random/muiltple. Full tune up still the same everything was warranted so did the tune up again I've learned just because it's new doesn't men it good and still the same. But I've driven it any way. Has new tune up new timing chain new water pump new heater core new crank sensor new idle air control sensor. I've check fuel pressure cylinder compression plugs look like they are perfect color. After the timing chain cleared codes and been driving it light came on for random/multiple and cylinder 6 as of right now
Does anyone have a clear to stop the bump and get rid of the CEL
