readylift vs zone

[Sig Schecter]

You need a grease gun and a grease tube. If you don't have one now is the perfect time to go to your local Oreallys or Napa or Autozone etc and buy those.
Once they're installed put the grease gun in the BJ zerk and pump them with grease. Repeat every 3-5k miles.

Youtube can teach you how to set the grease gun and how to grease zerks with it.

Ok the grease gun seems easy enough. Wasnt sure if I need to grease the bushings or whatever as well.

 

[ram1500rsm]

Ok the grease gun seems easy enough. Wasnt sure if I need to grease the bushings or whatever as well.

The bushings don't have zerks in your cases so you don't have to worry about them. You only need to grease both BJ's

 

[Sig Schecter]

The bushings don't have zerks in your cases so you don't have to worry about them. You only need to grease both BJ's

Great thank you