truck was running reliably, but was getting misfire #4, loosened rocker arm and idle smoothed out.
So replaced both hydraulic lifters for #4 cylinder.
Put it all back together and now no spark.
I have checked all the wires I unhooked to pull the intake manifold and I cant find anything that got left unhooked.
Is there anything I should check first... the truck sat for about 2 weeks before the repair was completed, so I'm wondering if something could have failed that was on its way out anyway, just seems like one hell of a coincidence, seems more likely that I left something unhooked someplace or something...
So replaced both hydraulic lifters for #4 cylinder.
Put it all back together and now no spark.
I have checked all the wires I unhooked to pull the intake manifold and I cant find anything that got left unhooked.
Is there anything I should check first... the truck sat for about 2 weeks before the repair was completed, so I'm wondering if something could have failed that was on its way out anyway, just seems like one hell of a coincidence, seems more likely that I left something unhooked someplace or something...
Last edited: