srt10 throttle body vs ram v10

[joepizuro]

What all are the differences? I've heard a lot of different stories of what mixes and matches..

Intake Manifolds
Heads
TB
INjectors

Never seen the viper motor myself

 

[Rustycowl69]

good luck trying to find info on this forum. I've got a v10, too, and I've found minimal info here or anywhere on the internet. If you find anything major let me know, too.

 

[MagSport]

I probably wouldn't use the srt10 throttle body on the truck motor as the viper motor uses two throttle bodies. Allpar has a great article on this engine if you like; http://www.allpar.com/mopar/V10.html
Very few components are shared between the truck platform and the srt10. As for trying to find information, the v10 trucks are kind of rare, not unwanted, but still in the context of 5.9s and 5.2s: uncommon. The aftermarket for the v10 is non existent so any performance upgrades will be of the homegrown nature. Unfortunately I'm not sure that viper heads will swap otherwise the srt10 dual manifolds and heads would be a great upgrade and would open aftermarket options up for sure.

 

[joepizuro]

Camshafts | Aftermarket High Performance Cams | Racing Cams
I have a crower cam for one I'm building.
Ebay has a sale going on the jba headers $300 off
Dodge RAM 8 0 V 10 JBA Stainless Steel Headers New CA Legal | eBay
SCT Tuners supports the truck. At least Hemifever does..

Fastman TB
Ram V10 8.0L Throttle Bodies - The Fastman

KN supports it

 

[MagSport]

Camshafts | Aftermarket High Performance Cams | Racing Cams
I have a crower cam for one I'm building.
Ebay has a sale going on the jba headers $300 off
Dodge RAM 8 0 V 10 JBA Stainless Steel Headers New CA Legal | eBay
SCT Tuners supports the truck. At least Hemifever does..

Fastman TB
Ram V10 8.0L Throttle Bodies - The Fastman

KN supports it

I stand corrected.

 

[jsmith]

No idea if they still make them but I've seen Harland Sharp RR's on the V10s before too. Also there was a post on one of the other Ram forums by a v10 owner just a couple days ago commending Flyin Ryan on his tune for it

 

[GotV104x4nV84x4]

Yes you can get Headers for the V10,got a set of Chrome Gibson's on mine!!Thought I would have a great (exhaust) guy I know do the install at his shop...run me about $200.But then I was like...screw it...do it myself.Been about two years...no leaks.

 

[joepizuro]

Still trying to find someone who could do a larger TB