The Build of CamoRam

[loki223]

jesus, where'd you go to get screwed that hard? don't tell me you went to schwabs....

 

[Davy120]

haha no schwabs prolly would have been like 2k lol i went to the place that discount recommended for alignments, which is nelsons over on francis, they were just gonna do an alignment but found that, but sicnce then i went out and looked at all the ball joints and honestly they all look fine. so idk, found a complete set lower ball joints, upper controls arms and new tie rod ends for $135 and i could just install them myself.

 

[loki223]

isn't nelson's the wrecking company? if you want it done, try the american tire depot (yeah, i know, all the way back up here on the north side) but give 'em a call, they will give u a fair price. i know the owner in a roundabout way. but i would trust their opinion, they aint out to rip people off. but neither is discount, nelsons....wouldn't go that far.....lol

 

[loki223]

when i doubt talk to your local redneck, chances are they can refer you to the best local places...

might even try ulricks, they are pretty good there too

 

[Davy120]

I may have them looked at by american tire just to get a second opinion.

 

[loki223]

yeah, i would atleast consider it. they are good people down there, i had my oil changed there once (was about to go to seattle and didn't have time to do it myself) and they looked everything over for no extra cost and all they mentioned was my diff cover was leaking a little, but nothing bad. didn't even suggest i have it fixed, said if i wanted to i could but its fine as is. (which is another reason i planned on looking into m difffs and redoing the seals and fluid change)

 

[Davy120]

so looking at getting this bullbar sold and buying another one that requires less work lol. when/if i get this other one ima mount two 6inch led bars on it or one 14inch not quite sure yet any thoughts?

 

[Catchin Zs]

Go for it!

 

[loki223]

I think either would look good. Personally im a fan of round lights, and dual light set ups. So i would go for the 2 light bars instead of one big one.

 

[Davy120]

Thats what im thinking too might be cheaper as well

 

[RompinRam]

I think round lights look better on 3rd gens. Unless your gonna be like Reece and get 64" of pure light haha. I will have pics of my light bar with 4 6.5" kc's on soon so I'll shoot you some pics of it for reference.

 

[Davy120]

kk cool. yea im kinda torn between the round kc style and just retrofit some HIDs in them or just mount up some led bars idk. on another topic im ******* pissed, i bought a fishing pole antenna today and drove maybe a mile and the damn thing snapped off leaving a piece in my exisiting antenna holder, so now my old wont even go in, anyone know if i can just put a **** ton of JB weld in there and that will hold it?

 

[Davy120]

ok so update i JB welded the hell out of it and its holding fine so far, also gettting some new shocks come payday along with torsion keys, then to get a alignment lol

 

[loki223]

consider having the shop do the keys unless u got all the tools. (i have most of 'em just FYI) they can be a royal PITA, and this random snow we got today makes working outside kinda sucky. lol

also, on your truck, i'm assuming none of your shocks are wrapped in a spring? if so might need to buy some spring compressors, i don't have those, but they are on my list...lol

 

[Davy120]

no actually i prolly have the ****test year dodge ever built.....lol i have shocks front and back thats it no springs nothing, kinda sucks lol

 

[loki223]

lol, front end prolly due to being a half ton, but don't you have leafs out back?

 

[Davy120]

nah cause the 04 has coilovers lol and yea leafs in back

 

[Davy120]

Got some new shoes and socks what you all think?

Sent from my DROIDX using Tapatalk 2

 

[bigbadram1500]

Nice! specs?

 

[Davy120]

Pro comp offroad rims 17x9 -6mm offset, tires are 315/70r17 yokohoma geolanders

Sent from my DROIDX using Tapatalk 2