Updated RBZ and got a cool suprise

[LB3711]

Unfortunately i have windows xp on my laptop at home so that is not an option , i can howevver try the right click thing at work tomorrow

Fix is on the way LOL

 

[Dodgedan22]

If there's any 730 RER owners that need an update, or anyone that wants the latest gracenote update, let me know.



El Phono

Hey Trupiano. New to the forum and was just scanning through the forum and came across this thread. i have a 730N. You think you can send me the link to our update?

 

[reb0957]

can 24.04.31 be upgraded to 50.xx.xx

 

[LB3711]

What radio do you have?

Sent from my Nexus 7 using Tapatalk

 

[reb0957]

Rbz 430

 

[LB3711]

Rbz 430

can 24.04.31 be upgraded to 50.xx.xx

Not sure. Maybe someone else could answer that.

Sent from my Nexus 7 using Tapatalk

 

[Ramzaq]

can 24.04.31 be upgraded to 50.xx.xx

In the general scheme of things this update is for a radio starting with 20.xxxx, which would be an older version than 24.xxxx. So I do not see a reason why it wouldn't work.

 

[FALaholic]

Yes it should work.

 

[SoCal Ram]

Found out what the camera delay feature is. Since its new on mine. Its for when you backup for a while and change back to drive the camera stays on for a bit longer that instant switch back like before to drive. It does have a red X in the top right hand corner if you want to go back quicker.

Saw this post and found the "Camera Delay" option. Tried it and it doesn't work right. Yes, it delays going back to the radio screen BUT it goes black for the 5-10 second delay. It DOES NOT leave the camera on. The red X is up in the right corner but why even have it on if it's a black screen?! Any one else have this issue?

 

[JohnD72]

can 24.04.31 be upgraded to 50.xx.xx

I think as long as your radio software is at ver. 20.XX or higher, you are good to update to 33.XX and then 50.XX

Hope this helps.

 

[quietpeen]

i did this update today. I have the 430n (rbh) so it was a pleasant surprise that the nav updated too. The nav update worked on the 33.xx.xx update but not the 50.xx.xx update.

I remember seeing some posts that after the updated it seemed the bass was a little less. I feel that on mine(non alpine system) the bass is more

 

[JohnD72]

I remember seeing some posts that after the updated it seemed the bass was a little less. I feel that on mine(non alpine system) the bass is more

I've seen some say less, some say more...lol
I didn't notice a difference at all.

 

[quietpeen]

that's weird lol. after i turned the bass all the way up like it was before the update it seemed to hit much harder at lower levels and start to distort at lower level

 

[LB3711]

maybe its different for each type. alpine or not. I know I have more highs and less sub bass

 

[w4rmk]

I upgraded my RBZ radio on my 2011 Laramie yesterday using the 2 step method, going from 20 to 33 to 50. Worked perfectly. I am loving the new black theme.

 

[LB3711]

Nice. Glad it worked

Sent from my Nexus 7 using Tapatalk

 

[man n black]

Anybody know if this works for the 730n or if there is a similar update for it?

Ch

Sent from my SM-N900V using Tapatalk

 

[DirtyJeep]

I've updated my 430 RBZ.. but am still getting ugly blue buttons, instead of the darker buttons. Anyone have a cause or solution? I'm stumped.

More details: bought my 430 RBZ off eBay, it was supposedly out of a 2014 Chrysler. When I first installed it, it booted up right into the JEEP logo. Software was already at 50.00.07, but with ugly blue skinned buttons. I just re-installed 50.00.07 off a thumb drive, and the buttons are the same, but now the default JEEP picture that's skinned in the background is gone. It's just black. So frustrating.


(I'm a Jeep Owner looking for help!)

 

[LB3711]

can't say. We upgraded from a 2 steps lower firmware number

 

[Steveaux84]

I know this is an old thread, but any idea if this firmware is floating around anywhere?

Looks like the old link doesn't work anymore.

Also tried to go to the Chrysler site and input my VIN#, but it said my firmware should be up to date.

Any help would be great!