Weld on running board brackets

[Redcup]

I recently purchased the repair plates for the running boards. The issue I have now is that I can't find anyone that would weld them on for me. I had one body shop tell me $700 per side and wasn't even sure they could do it. I live in SW Wisconsin, does anyone know of a shop that could put them on?

Link for what I bought: https://northspecbuilt.com/products/4th-gen-ram-weld-on-running-board-repair-plates

 

[Brandon-w]

Go to a welding
/fab shop. Itd probly be a couple Hundered completed not 1400

 

[Dean2]

Take the running boards off the pickup, take them and the plates to someone to weld them. Check Kijiji, Craigslist, Facebook etc for cheaper options. If you are talking about welding the plates to the PU frame, that is a REALLY bad idea. They should be bolted on.

 

[Redcup]

Sorry I thought I included the link: https://northspecbuilt.com/products/4th-gen-ram-weld-on-running-board-repair-plates

This is what I bought.

Take the running boards off the pickup, take them and the plates to someone to weld them. Check Kijiji, Craigslist, Facebook etc for cheaper options. If you are talking about welding the plates to the PU frame, that is a REALLY bad idea. They should be bolted on.

 

[Wild one]

Sorry I thought I included the link: https://northspecbuilt.com/products/4th-gen-ram-weld-on-running-board-repair-plates

This is what I bought.

Check your local marketplace,sometimes you'll find somebody who does side welding jobs,or go buy yourself a little 120 volt mig and weld them on yourself.If you can point and pull a trigger,you can use a mig.