What did you do with your 4th Gen this week?

[1stindoor]

Putting this here since no one replied to the post in the 5th Gen area...

Removed my Pedal Commander (PC31) from my truck. I've had it on my previous Ram (2018) and when I traded it in, I put it in my 2023. I just ordered the Banks Pedal Monster...so, I'm willing to let the Pedal Commander go for the incredibly low price of...send me a PM if you want it. I no longer have the little bracket. I had it just draped across my steering column and pushed the Y connector through the gap near the height adjust. Nothing wrong with it; threw a code (happens once in a while) and decided to go with Banks. When the code gets thrown I get a Throttle Body issue message. I turn off the truck, disconnect the Pedal Commander, going back to stock, and after a few restarts or a day, the check engine light clears itself; and then I reconnect the Pedal Commander.

 

[vetteyog]

Pac springs???

Not sure what you mean? Springs are stock as far as I know.

 

[vetteyog]

New Tekonsha P3 brake controller. Looks good but haven't had a chance to hook up my 28 ft travel trailer and actually test it out yet.

Can you post an update when you get to try it out? I've been looking at this model.

 

[CanuckRam1313]

Had my winter 17" steelies with Blizzak DM-V2's rebalanced and put on last Saturday.
Fantastic winter tires!

Also had a new Bakflip MX4 cover installed a few weeks ago, too.
Some azz_clown decided that they needed to cut open my factory soft cover to see if there was something worth an 8-ball in there.

My cameras caught him at 5:25am, however, my alarm didn't go off as he was tall, leaned over without rubbing the truck, and used a razor to slice open the cover.

I've since installed a new LED super bright PIR/microwave dual head security light right on my front porch post positioned at my truck and the driveway in general, and new cameras around the perimeter of my home as well. Should have done it a while ago, but this prompted me to do it!

 

[Burla]

Dang on a new top too? Shoulda went diamond back with linex? Sucks though, I'm pretty sure karma is eating his liver as we speak.

 

[bitdrive]

hi twin
View attachment 555885

Well hello there twin!!

 

[CanuckRam1313]

Dang on a new top too? Shoulda went diamond back with linex? Sucks though, I'm pretty sure karma is eating his liver as we speak.

Yep, it was the factory top that came with my new Warlock.
It also came with the factory spray in bed liner, too.
If not, it would have gone right to Linex the day after purchase.

I had my 19' for almost 5-years with the factory soft top and not one issue with nonsense.
I have my new truck for 9-months and this happens.

Thankfully I have a friend at a Dealership who got me this new RealTruck Bakflip MX4 cover with 5-year warranty for $1K CDN cash, that also included them installing it as well.
I still find it hard to digest that it retails for almost $1,800.00 CDN plus tax.

 

[CanuckRam1313]

Dang on a new top too? Shoulda went diamond back with linex? Sucks though, I'm pretty sure karma is eating his liver as we speak.

Now that I've looked into your recommendation..and understand the verbiage...lol

Yes, the DiamondBack-X cover is one tuff AF bed cover... even skinny me could dance on it after some Tito's and ribs... lol and at $3,300.00 CDN plus tax.. it better hold tiny me

 

[EagleChief]

added tailgate spoiler $65 View attachment 555525View attachment 555526

Now you need the spoiler that goes on the top of the cab to match the one on the tailgate.

I saw it on here a few years ago. I don't remember the name of it, but it is/was very similar to your tailgate spoiler.

 

[GB55]

pulled the B pillar vinyl off, found a color matched factory grille and some painted mirrors (too cold to put them on though)

 

[Sean J Blackburn]

Can you post an update when you get to try it out? I've been looking at this model.

I will try to remember to do this

 

[jawzs2]

Used it to get our new TT this weekend, 2025 Keystone Cougar 29RLP

 

[91rt]

Finally pulled the trigger and added the cab lights to my truck. Wanted them for a long time and missed having them from my Cummins, so I said screw it. I am very happy with the results! Used a OEM Mopar kit and it went flawless. No holes mismarked and the template worked great. I moved em back a half inch from the edge of the windsheild from where the template wanted them. Glad I did as it is more pleasing to my eye. Might have a tad bit of OCD going on. Man these trucks are made of swiss cheese as the metal bends if ya just look at it wrong ha!

 

[CanuckRam1313]

Finally pulled the trigger and added the cab lights to my truck. Wanted them for a long time and missed having them from my Cummins, so I said screw it. I am very happy with the results! Used a OEM Mopar kit and it went flawless. No holes mismarked and the template worked great. I moved em back a half inch from the edge of the windsheild from where the template wanted them. Glad I did as it is more pleasing to my eye. Might have a tad bit of OCD going on. Man these trucks are made of swiss cheese as the metal bends if ya just look at it wrong ha!





View attachment 556219View attachment 556220

The new lights look great...

What ya got tucked under the cover

 

[bcbouy]

gave mine its weekly power wash.it's so nice having a personal indoor powerwash station. we've been getting constant freeze/thaw here so they've been extra generous sanding the local roads.road grime right up to the windows.

 

[91rt]

The new lights look great...

What ya got tucked under the cover

 

[CUAviator]

Got my USB cable on/off switch so that I can leave my Elite Car Box 3 plugged into the (always powered) CarPlay USB outlet in the console.

 

[CanuckRam1313]

View attachment 556224View attachment 556225

Oh... HE-Double Hockey Sticks........YESSSSSSSSSSSS!!!!!
Thanks for sharing, Brother!

 

[91rt]

Oh... HE-Double Hockey Sticks........YESSSSSSSSSSSS!!!!!
Thanks for sharing, Brother!

Just finished the Runner last spring. Had it for 15 years and did a full resto on it when the paint started peeling and such. Took me 3 years start to finish which wasn't too bad. Didn't want it to turn into a corner shelf in the garage like some/most projects do. The Charger I did half the resto after buying it off my buddies wife after he died of lung cancer. We had an age gap as he was 64 and I was 29 but she knew I'd finish the car and take great care of it and not flip it. Now I just clean them and maintane them and have slowed down as we are doing an addition and trying for kids......but the cars will always be there for ice cream and rides for the kids. Also got this '78 360 4 speed as well. Keeps me busy.

 

[CanuckRam1313]

Just finished the Runner last spring. Had it for 15 years and did a full resto on it when the paint started peeling and such. Took me 3 years start to finish which wasn't too bad. Didn't want it to turn into a corner shelf in the garage like some/most projects do. The Charger I did half the resto after buying it off my buddies wife after he died of lung cancer. We had an age gap as he was 64 and I was 29 but she knew I'd finish the car and take great care of it and not flip it. Now I just clean them and maintane them and have slowed down as we are doing an addition and trying for kids......but the cars will always be there for ice cream and rides for the kids. Also got this '78 360 4 speed as well. Keeps me busy.

View attachment 556238

Great looking rig!
GL on the kiddo production.... keep practicing...lol

My daughter is about to turn seven on Christmas day.... best thing I've ever made in my life is her!
I've had some cool projects over the years, but nothing tops a kiddo!