Wheel width question

[MaverickHD]

This is been kind of a nightmare because every wheel dealer I talk to gives me different info. I'm using the Supreme Suspension 3 in leveling lift spacers. I want to replace my factory 20in alloys with 22 inch wheels. My question is I want them to stick out of my wheel wells 1 1/2 to 2 inches so I don't know if I can go wider then a 10 inch wide wheel. I had one guy tell me I could use 14 inch wide wheels LOL also I'm told I will need a backspace of less than 5.5 which is fine with me. So am I stuck with an 18 negative offset or can I go to a 44 and will 35 inch tires fit

 

[Sandbox]

The best thing I can offer is to use the gallery at customwheeloffset.com. You can put in wheel, tire and lift specs and get feedback with photos.

 

[Jdfrakes]

I'll second Custom Offsets, they have 100's of Rams in their gallery so I bet you will find the fitment you want. The 22x14's I've seen usually have a lot of negative offset (-44 or more) so they will stick out way more than you want.

 

[AustinHarmon]

X10s will usually be -12/-25, x12s will be -44s and x14s are like -76! X10s would be your best bet for what you’d like. I’ve got 20x12s -44s with 35s and they stick out about 3-4”


Sent from my iPhone using Tapatalk