Wire splicing

[alpinegreenneon]

Does anyone know the part number for the little brass crimping clips that are recommended in the following video about the correct way to splice wires from the FSM:

wiresplicing.mp4

drive.google.com

Looks like the connector pinouts site has changed:

Mopar Connection Repair Kit

connectorrepairkit.mopar.com

 

[alpinegreenneon]

I should have looked a little harder. Found the answer:

Inline wiring splice clips........from the Dodge RAM service manual

!!HUH!! Old man learned something. Was into the Dodge ram service manual and saw a little drawing about inline splice "clips" A simple little "U" shaped clip that you wrap around the "running" wire along with the "to be added" tap wire, and crimp. Solder........Makes a...

www.forabodiesonly.com

wiresplicecrimps.jpg

drive.google.com

 

[Jeepwalker]

The video is probably overkill for most guys. The proper crimp tool that's needed to get a real Pro crimp, looks something like THIS. But realistically speaking, it's probably not worth investing in such a tool for just a few crimps. Interlocking the wire strands and soldering (and heat shrink tube) ...the joint is not going to come apart. Use an electronic's grade solder.