Wiring issue.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Venacava1

Junior Member
Joined
Jun 24, 2019
Posts
3
Reaction score
0
Location
West Virginia
Ram Year
2015
Engine
6.7 Cummins
I have a 2015 3500 with the 6.7 all od the sudden I have no left turn signal with any of my trailers. The signals on the truck work and when I hook the multimeter up to it I'm getting the voltage as if the signal is working property. But when I check amperage it's very low compared to the right turn signal. Any ideas?
 

ramrocker

Senior Member
Joined
Oct 22, 2017
Posts
193
Reaction score
111
Location
Pearland, TX
Ram Year
2017
Engine
6.7L CTD
I have a 2015 3500 with the 6.7 all od the sudden I have no left turn signal with any of my trailers. The signals on the truck work and when I hook the multimeter up to it I'm getting the voltage as if the signal is working property. But when I check amperage it's very low compared to the right turn signal. Any ideas?

I'd probably get some stop/turn bulbs and make up a test jig so I could plug each into the right/left on the 7-pin on the truck and then see if right and left volts & amps looked the same to figure out if it's truck wiring problem or trailer.
 

madtrucker2016

Senior Member
Joined
Apr 21, 2019
Posts
1,773
Reaction score
1,044
Location
New York-Staten Island
Ram Year
2025
Engine
3.0 Hurricane twin Turbo
Check for a relay on the tpm it might be bad on the contacts . Some times I check the tpm and can push the relays back down , like they are popping out
 
Back
Top