Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I see you're in Gilbert. I'm gonna pay you a nonliving wage to do **** to my truck LOLMust be another one of the "minor", undocumented changes that Ram did to the 2015's. I've found a few little things like this between mine and my buddy's 2012.
Yes.Did you put spacers on front and back bolts under the brackets.
I found out today Gilbert is still considered a town.... And with that they are the largest town in the world.YA, I've been here almost 18 years. Bought in back when Gilbert was too far out for everyone, and houses were still affordable. Now it's just ridiculous. Hell Val Vista was still 2 lanes, and Ray was still dirt when I moved here...
Yes, and you can use MDF and liquid nails to get a firm platform going. A few pics in the audio forum. I can send mine if you want. I sound deadened the truck before I did the amp wall though.Gonna make an amp rack. It's okay to cut some of that molding from behind the seat to screw a board to the back of the cab right
Sent from my SM-N950U using Tapatalk
If it's not an inconvenience, please do post pictures.Yes, and you can use MDF and liquid nails to get a firm platform going. A few pics in the audio forum. I can send mine if you want. I sound deadened the truck before I did the amp wall though.
Admittedly, a lot. And I did doors, floor and roof. But if you sat in my truck you would freak out on just how quiet it is, even with headers and a loud muffler.How much did all that mat cost OMG.
Sent from my SM-N950U using Tapatalk
Admittedly, a lot. And I did doors, floor and roof. But if you sat in my truck you would freak out on just how quiet it is, even with headers and a loud muffler.
That’s right, let the mods flow through your veins.... feel it. What’s the next upgrade? Inquiring minds wanna know!
Guessing close to a grand. Maybe more... That stuff is insanely expensive. Soon as I finish this audio equipment. I'll find something else to start on lol.
Sent from my SM-N950U using Tapatalk
Did you get this resolved. What box do you have, it looks very similar to mine. I had to do the seat mod and before doing so, was thinking I would have the same issue as the front of the box sits on the bracket as well. I figured the seat would never clear. However, after adding 8 spacers per bolt (3/4") lift, it did in fact work and the seat also folds down with ease.