hodge-xj
Senior Member
- Joined
- Jun 7, 2013
- Posts
- 2,802
- Reaction score
- 2,354
- Ram Year
- 2006
- Engine
- 5.9 cummins
I wouldn't go messing with preload. Wulf suspension has .5" spacers that you could use to shim the front up on the drivers side with. They are cheap. I grabbed a generic 1/2 jeep JK spacer in the back. About 30 seconds with a sawsall it fit perfect and was like 10$. Check out my build thread. I figured the rear was the culprit considering the fuel tank and def tank for me are both biased to the drivers rear. Have had no issues in like 20k miles.Mike, did you do any pre-load adjustment to your 2.0s and if not, was the lift height the same left to right? I'm seeing .625" lower fender height on the driver side. Mine have only been on for a few weeks, so they still need to settle in.
Sent from my SM-N920V using Tapatalk